rf and testing jobs - search results for rf and testing jobs

Search [ Popular Searches ]

Click here to visit
our list of resources!

UK Accounting Jobs

Childcare Jobs

Engineering Jobs

Searched in jobs for keywords rf and and and testing and jobs

Results are ordered by date. Older jobs are included as that agency may have other jobs that fit the search: rf and testing jobs.

Click the job you want more information on:

Opto Test Technician: posted on 17/11/2004
location West Midlands United Kingdom, Northamptonshire
description Our client now requires a Test Technician to be responsible for setting-up and carrying out functional testing to specification of optical components using computer controlled test equipment. Shift work and overtime will be required. Required skills include: -Knowledge of electronic test equipment (ATE, spectrum analyser, power meter) -VB6 experience desirable -Experience of working within a semiconductor manufacturing environment -ONC in Electronics or equivalent qualifications Please call us to discuss further.
skills semiconductor, electronics, opto, test, technician, test equipment, VB6, RF, PROMIS, component, semi automatic probe test, manufacturing, jobs
Test Technician â€“ RF/Microwave: posted on 05/11/2004
location England North East
description Microwave design company, producing antennas, filters & multiplexers for the airborne market seek a Test Technician â€“ RF/Microwave to work in their state of the art microwave laboratory. Ideally you will have a background in the testing of products such as antennas, filters, multiplexers, RF equipment etc, but this is not essential for the role and less experienced people will be considered. Skills: antennas, filters, multiplexers, Microwave & RF equipment
skills Skills: antennas, filters, multiplexers, Microwave & RF equipment
Software Test Technician (qualification): posted on 05/11/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer: posted on 05/11/2004
location Cambridgeshire Cambridgeshire, UK
description To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
skills To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
RF Designer - GSM Transmitter: posted on 05/11/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
RF Development Engineer: posted on 03/11/2004
location Wiltshire United Kingdom, South West
description This is an opportunity to join a new and exciting fabless semiconductor company that is developing a breakthrough new technology initially to be targetted at the wireless market. In this position, the candidate will be responsible for the detailed specification and design of reference dual mode GSM/WCDMA radio module designs for 3G wireless terminals and the specification of the RF to Baseband and Power management interfaces for a 3G platform. You will have experience using market leading RF solutions for GSM and/or 3G terminals. Detailed knowledge of GSM/WCDMA RF system requirements. Detailed experience in RF performance modelling and testing. Candidates should have an excellent academic background (at least a 2:1 degree from a top-tier university) and at least 3+ years experience. They should also be highly motivated and excited by the prospect of working in a fast-paced startup environment. Call IC Resources on 0208 400 2444 or email james@ic-resources.co.uk
skills RF, wireless, mobile, terminals, GSM, WCDMA, radio, 3G, modelling, testing, reference
Software Test Technician (qualification): posted on 29/10/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer: posted on 29/10/2004
location Cambridgeshire Cambridgeshire, UK
description To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
skills To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
RF Designer - GSM Transmitter: posted on 29/10/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Onsite Rigger Engineers and technicians: posted on 27/10/2004
location England uk wide
description Working for a major communications installation company, you will be required to work onsite at various locations in the uk on the installation of communication equipment. Skills required are: • Field service experience • RF Engineering/analysis • Site optimization and field expertise • Onsite equipment testing
skills Working for a major communications installation company, you will be required to work onsite at various locations in the uk on the installation of communication equipment. Skills required are: • Field service experience • RF Engineering/analysis
Test Technician â€“ RF/Microwave: posted on 24/10/2004
location England North East
description Microwave design company, producing antennas, filters & multiplexers for the airborne market seek a Test Technician â€“ RF/Microwave to work in their state of the art microwave laboratory. Ideally you will have a background in the testing of products such as antennas, filters, multiplexers, RF equipment etc, but this is not essential for the role and less experienced people will be considered. Skills: antennas, filters, multiplexers, Microwave & RF equipment
skills Skills: antennas, filters, multiplexers, Microwave & RF equipment
RF Designer: posted on 22/10/2004
location Cambridgeshire Cambridgeshire, UK
description To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
skills To design RF products (10GHz) for automotive, industrial and defence companies. The client provides hardware and system design for RF products:- short range wideband / UWB radar for automotive and industrial applications and missile test and development systems; electronics development for positioning and location systems from RFID to UWB location; antenna design to support automotive, telecommunications and sensing products. You will have depth in one of the following; antenna design for low cost and compact applications; RF Design for systems operating at frequencies between 400MHz and 10GHz; sensor design (Analogue, RF and Microwave); RF design for automotive and aerospace environments; EMC testing; type approval standards and testing for European, US and far eastern markets; design for volume production. B.Sc. / M.Sc with 2 years industry experience. Doctorates with RF design experience will also be considered. Must have design experience in projects involving RF design.
Software Test Technician (qualification): posted on 22/10/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 22/10/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Senior Hardware Design Engineer: posted on 15/10/2004
location England South East, Middlesex, London, Surrey, Berkshire,
description Test Engineer to support evaluating and verifying GSM, GPRS & UMS mobile platforms. You will also be confident in writing ATE test scripts. Suitable candidates will have an HNC or Degree in Electronic Engineering, have at least one years test development experience, have good experience of RF test and measurement techniques and have at least 3 years experience of testing RF circuits and sub systems.
skills GSM, GPRS, UMS, ATE, RF, Electrical, Hardware, Hardware Design, Test, Design
RF Characterization Engineer: posted on 15/10/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description Our successfully growing client now requires a RF Characterization Engineer to assist in the design and implementation of RF characterization test systems. The role will involve addressing all aspects of the RF testing within the test systems as well as verification of the test modules. Required skills include: -Strong background in RF test and measurement techniques -MatLab knowledge for use in ATE -Experience with VB would be beneficial -Degree in Electronics / Physics or equivalent qualifications Please call us to discuss further.
skills semiconductor, IC, RF, characterization, engineer, Matlab, VB, test, ATE, design, manufacturing, jobs
Test Technician â€“ RF/Microwave: posted on 14/10/2004
location England North East
description Microwave design company, producing antennas, filters & multiplexers for the airborne market seek a Test Technician â€“ RF/Microwave to work in their state of the art microwave laboratory. Ideally you will have a background in the testing of products such as antennas, filters, multiplexers, RF equipment etc, but this is not essential for the role and less experienced people will be considered. Skills: antennas, filters, multiplexers, Microwave & RF equipment
skills Skills: antennas, filters, multiplexers, Microwave & RF equipment
Test Engineer/Test Development Engineer: posted on 13/10/2004
location England Europe, Czech Republic, Nationwide, UK
description Our client is a designer and manufacturer of electronic components for various uses in the automotive industry. They are expanding their manufacturing operations into the Czech Republic and as a result need some skilled English speaking engineers. Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
skills Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
Systems Test Engineer: posted on 07/10/2004
location East Sussex East Sussex, West Sussex, Hampshire, South East
description Our medical client is currently seeking a Systems Test Engineer to test and commission systems to the required quality standards. Applicants will have a minimum of two years experience in testing and servicing multidiscipline systems containing electronics or electromechanical assemblies, ideal candidates will have a degree in electronics or a physics based subject and have experience of RF up to 3Hz with an understanding of Radar Systems. Medical background desirable. Lots more vacancies at www
skills Systems Test Engineer, commissioning, Medical, RF, Radar, Physics, Electronics
Production Technician: posted on 07/10/2004
location Berkshire Reading
description Purpose of the Role: To carry out efficient and effective testing and rework / repair of GPS units / sub-assemblies. Able to use and configure test equipment including oscilloscopes, RF generators, spectrum analysers, DMMs and frequency counters. Able to read and understand electronic circuit diagrams in order to trace faults to component level. Able to obtain MOD Security Clearance. Age 21 or above (required for inspection duties).
skills Testing Repair Reword
Test Engineer/Test Development Engineer: posted on 05/10/2004
location England Europe, Czech Republic, Nationwide, UK
description Our client is a designer and manufacturer of electronic components for various uses in the automotive industry. They are expanding their manufacturing operations into the Czech Republic and as a result need some skilled English speaking engineers. Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
skills Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
GPS Production Technician: posted on 05/10/2004
location England Reading
description My Multi National Defence client are looking for a number of GPS Production technicians to carry out efficient and effective testing and rework/repair of GPS units / sub assemblies. Your role will be to perform a variety of electrical / mechanical tests on prototype curcuit boards or units to determine performance to specifications and identify malfunctions or failure. You will be conducting environmental stress tests, using automated test equipment & manual test equipment. There are excelle
skills You will need an ONC/HNC electronics or equivalent & you must be able to use and configure test equipment including oscilloscopes, RF generators, spectrum analysers,DMMs & frequency counters as well as being able to obtain MOD security clearance. It
Production Technician: posted on 29/09/2004
location Berkshire Reading
description Purpose of the Role: To carry out efficient and effective testing and rework / repair of GPS units / sub-assemblies. Able to use and configure test equipment including oscilloscopes, RF generators, spectrum analysers, DMMs and frequency counters. Able to read and understand electronic circuit diagrams in order to trace faults to component level. Able to obtain MOD Security Clearance. Age 21 or above (required for inspection duties).
skills Testing Repair Reword
Software Test Technician (qualification): posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Test Engineer/Test Development Engineer: posted on 20/09/2004
location England Europe, Czech Republic, Nationwide, UK
description Our client is a designer and manufacturer of electronic components for various uses in the automotive industry. They are expanding their manufacturing operations into the Czech Republic and as a result need some skilled English speaking engineers. Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
skills Skills: In-Circuit testing, HP 3070, Innovate 9100, GPIB, PC I/O Card Installation, NPI, New Product Introduction, RF, QS9000, PCB
Test Systems Engineer: posted on 16/09/2004
location Essex Essex
description Test Systems Engineer Essex c£30k My client a leading supplier of RF, microwave & sensing components & sub-systems. A systems engineer will be responsible for the interpreting project details and developing hardware and software to fulfil the test requirements. This will take the form of commissioning new device types on existing systems, or working as part of a team developing new systems and jigs for non-standard applications. You will be required to develop specialised hardware and software to facilitate electro-optical testing of custom semiconductor devices, Interpret results using standardised methods to verify test system operation, Maintain/calibrate test systems and provide technical support to production test. Min 2 years technical experience and strong practical skills combined with mixed signal electronic design experience. Software programming experience, especially in Labview, C++ or assembler would be ideal as would knowledge of standard statistical analysis methods To apply for this position please contact Lisa Hart on 01582 450054 or LHart@Redlineplc.com For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
Principal Test Approvals Engineer: posted on 15/09/2004
location Berkshire
description Berks The Client is a large global electronics company and a major player in the mobile phone industry, most recently entering the 3G Market. The have a brilliant working culture where the employee is seen as the Company's greatest asset and so is treated as such. Due to continued success they are now looking for a Principal Test Approvals Engineer to be responsible for pre-regulatory/regulatory testing of mobile communication products. You should have a good understanding of RF principles and mobile comms test equipment. It is also imperative that you have good documentation control and have worked to known quality standards. The role will require working both individually and as part of a team coupled with support and supervision of junior members. If you have an RF/Radio Telecommunications testing background and would like to work for a world renowned company then call Guy Brown today on 01582 878807 or mail your CV to GBrown@Redlineplc.com
skills
Software Test Technician (qualification): posted on 10/09/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 10/09/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Software Test Technician (qualification): posted on 03/09/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 03/09/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Software Test Technician (qualification): posted on 27/08/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 27/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
RF Specialist: posted on 27/08/2004
location England Northants, Northamptonshire, South East, England,
description This company is experiencing a rapid growth of sales for their state-of-the-art technology which has resulted in an urgent requirement for an highly intelligent, analytical and creative RF Specialist to be involved in all processes involving RF test. You will develop the accuracy and repeatability of all existing RF testing equipment, implement new RF testing methods throughout the company and design all mechanical aspects relating to RF measurements.
skills RF Test, Antenna, Microwave
Test Engineer: posted on 20/08/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
RF Designer - GSM Transmitter: posted on 20/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Software Test Technician (qualification): posted on 19/08/2004
location Cambridgeshire Cambridgeshire, UK
description To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
skills To test embedded and upper layer firmware associated with radio devices inc. running and analysing automated test scripts using qualification software and hardware. Monitor day-to-day running of test results. Documentation of results and fault logging, inc. possible validation of TTCN test cases. You may also become involved in basic GUI and mobile phone manual testing. You will have responsibility for assisting with testing of Bluetooth and other radio protocol software before customer release, i.e. qualification of Bluetooth lower and upper layers, tracking non-conformance test cases within the SIG, Anritsu BlueTooth RF checks, USB conformance testing, occasional manual testing of GUI interfaces/mobile phones. Experience of qualification testing very desirable. You must have experience of Windows and MS-Office, an understanding of qualification procedures and ideally some knowledge of TTCN and/or basic Test Scripting, qualification test experience with communication protocols.
RF Designer - GSM Transmitter: posted on 13/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
Test Engineer: posted on 13/08/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
RF Designer - GSM Transmitter: posted on 06/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
RF Designer - GSM Transmitter: posted on 06/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
RF Designer - GSM Transmitter: posted on 06/08/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
RF Design Engineers - junior engineer to project leader leve: posted on 05/08/2004
location Gloucestershire
description RF Design Engineers - junior engineer to project leader level £25k-£50k Gloucs These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products. Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design. You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment. For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff. You must be a British passport holder and able to obtain security clearance in order to be considered for these roles. To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
Test Engineer: posted on 23/07/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
IC Test / Validation Engineer: posted on 22/07/2004
location Wiltshire United Kingdom, South West
description This is a role offering variety and wide ranging technical challenge, within one of the UKs most impressive start up organisations. Having already designed and fabbed a ground breaking analogue IC for high speed communications, the company now seeks an IC Test / Validation Engineer to join the test and product engineering team. Joining a committed and creative team of experienced semiconductor professionals, the successful candidate will develop a range of test solutions to fully evaluate analogue ICs. Some combination of the following skills is required: -Good background and experience with IC Test and Validation within a lab environment -Knowledge of RF techniques -RF / High speed digital testing (Gbps) -RF board design and layout -Experience of working on analog / mixed signal devices The key criteria are board design skills, good RF or high speed digital and analogue understanding, and demonstrable technical creativity. Please contact us to discuss in full confidence.
skills Semiconductor, IC, engineer, test, validation, analog, analogue, digital, mixed signal, RF, high speed digital test, RF board design, layout, hardware, software, jobs
Principal Test Approvals Engineer: posted on 14/07/2004
location Berkshire
description Principal Test Approvals Engineer £ Excellent + Benefits Berks The Client is a large global electronics company and a major player in the mobile phone industry, most recently entering the 3G market. The have a brilliant working culture where the employee is seen as the Company's greatest asset and so is treated as such. Due to continued success they are now looking for a Principal Test Approvals Engineer to be responsible for pre-regulatory/regulatory testing of mobile communication products. You should have a good understanding of RF principles and mobile comms test equipment. It is also imperative that you have good documentation control and have worked to known quality standards. The role will require working both individually and as part of a team coupled with support and supervision of junior members. If you have an RF/Radio Telecommunications testing background and would like to work for a world renowned company then call Guy Brown today on 01582 878807 or mail your CV to GBrown@Redlineplc.com
skills
Baseband Test Engineer: posted on 13/07/2004
location England SURREY/HANTS BORDER
description To join a small multi-disciplinary project team responsible for testing, fault finding and design of wireless solutions (RF & Baseband). You will need:-You will need:A Degree or HND in Telecommunicatiosn or Electronics. 3 Years + Baseband Design/Testing/Intergration. Basic understanding of Baseband systems ie. microprocessors, memories, digital/analogue interfaces. Good team Player, self starter.-If you have experience of the following it is a real bonus:-Knowledge of cellular protocols such a
skills baseband
Rf Test Engineer: posted on 13/07/2004
location England SURREY/HANTS
description To join a small multi-disciplinary project team responsible for testing, fault finding and design of wireless solutions (RF & Baseband). You will need:-A Degree or HND in Telecommunication or Electronics. 3 Years + RF Design/Testing/Intergration. Good experience of RF test equipment.Basic understanding of production/Quality processes for volume production. Must be a self starter.Any of the following would e highly desirable:-Knowledge of Cellular protocols such as GSM or WCDMA. Knowledge of mass
skills RF testing
RF Design Engineers - junior engineer to project leader leve: posted on 12/07/2004
location Gloucestershire
description RF Design Engineers - junior engineer to project leader level £25k-£50k Gloucs These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products. Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design. You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment. For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff. You must be a British passport holder and able to obtain security clearance in order to be considered for these roles. To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
Test Engineer: posted on 09/07/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
Technical Services Manager: posted on 09/07/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
RF Specialist: posted on 08/07/2004
location England Northants, Northamptonshire, South East, England,
description This company is experiencing a rapid growth of sales for their state-of-the-art technology which has resulted in an urgent requirement for an highly intelligent, analytical and creative RF Specialist to be involved in all processes involving RF test. You will develop the accuracy and repeatability of all existing RF testing equipment, implement new RF testing methods throughout the company and design all mechanical aspects relating to RF measurements.
skills RF Test, Antenna, Microwave
Technical Services Manager: posted on 02/07/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
Test Engineer: posted on 02/07/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
Test Engineer: posted on 01/07/2004
location England Hampshire
description We are looking for an experienced electronics Test Engineer with experience of RF test, who, once trained by my client, will carry out EMC compliance testing to both military and civil specifications in such markets as automotive, medical and telecoms. You will also be involved in the preparation of associates test plans and reports. Some client facing skills are also needed for this role with an exciting and forward thinking company.
skills test electronics
Mechanical Antenna Design Engineer: posted on 30/06/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description Mechanical Antenna Design Engineer (Antenna, 3D CAD), Cambridgeshire Educated to a min of BSc in Mechanical Engineering you will have at least 5 years experience in the mobile phone industry. Candidates should be proficient in CAD tools. Analytical skills such as Thermal Analysis, tolerance study, statistical analysis and component reliability modelling. Basic understanding in RF circuit and Antenna theory. Working knowledge of S-parameter and impendance radiation pattern measurement. Experience with environment testing. Responsible for the delivery end performance of design output through the initiation to mass production. For further detail, please contact andrew@probecomms.co.uk on 0207 745 7213.
skills Antenna, RF, 3D CAD
RF Specialist: posted on 29/06/2004
location England Northants, Northamptonshire, South East, England,
description This company is experiencing a rapid growth of sales for their state-of-the-art technology which has resulted in an urgent requirement for an highly intelligent, analytical and creative RF Specialist to be involved in all processes involving RF test. You will develop the accuracy and repeatability of all existing RF testing equipment, implement new RF testing methods throughout the company and design all mechanical aspects relating to RF measurements.
skills RF Test, Antenna, Microwave
Technical Services Manager: posted on 25/06/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
RF Design Engineers - junior engineer to project leader leve: posted on 22/06/2004
location Gloucestershire
description RF Design Engineers - junior engineer to project leader level £25k-£50k Gloucs These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products. Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design. You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment. For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff. You must be a British passport holder and able to obtain security clearance in order to be considered for these roles. To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
RF Specialist: posted on 21/06/2004
location England Northants, Northamptonshire, South East, England,
description This company is experiencing a rapid growth of sales for their state-of-the-art technology which has resulted in an urgent requirement for an highly intelligent, analytical and creative RF Specialist to be involved in all processes involving RF test. You will develop the accuracy and repeatability of all existing RF testing equipment, implement new RF testing methods throughout the company and design all mechanical aspects relating to RF measurements.
skills RF Test, Antenna, Microwave
Technical Services Manager: posted on 18/06/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
Technical Services Manager: posted on 11/06/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
EMC Engineers – all levels: posted on 09/06/2004
location England Hampshire, Sussex, Surrey
description Major research defence organisation seeks EMC Engineers of all levels. They seek EMC Test Engineers and EMC Project Engineers to be responsible for product assurance solutions and testing of high value and complex systems for military and commercial markets. You will be involved in product testing, electromagnetic assessments & report preparation for customers. You will need to be qualified to HND/degree level or equivalent with at least one year’s experience in testing products in the military,
skills Skills: EMC, Electromagnetic Compatibility, TEMPEST, DEF STAN 59-41, DEF-STAN 00-35, RTCA DP/160, MIL-STD 461, MID STD 810, EMC Test, EMC Project Engineer, Product Testing, RF Test, UKAS, BS 17025
Technical Services Manager: posted on 09/06/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test emc manager rf or electronics cellular
RF Test Technologist: posted on 07/06/2004
location England Northants, Northamptonshire, South East, England,
description This company is experiencing a rapid growth of sales for their state-of-the-art technology which has resulted in an urgent requirement for an highly intelligent, analytical and creative RF Specialist to be involved in all processes involving RF test. You will develop the accuracy and repeatability of all existing RF testing equipment, implement new RF testing methods throughout the company and design all mechanical aspects relating to RF measurements.
skills RF Test, Antenna, Microwave
Test Systems Engineer: posted on 03/06/2004
location Essex Essex
description My client a leading supplier of RF, microwave & sensing components & sub-systems. A systems engineer will be responsible for the interpreting project details and developing hardware and software to fulfil the test requirements. This will take the form of commissioning new device types on existing systems, or working as part of a team developing new systems and jigs for non-standard applications. You will be required to develop specialised hardware and software to facilitate electro-optical testing of custom semiconductor devices, Interpret results using standardised methods to verify test system operation, Maintain/calibrate test systems and provide technical support to production test. Min 2 years technical experience and strong practical skills combined with mixed signal electronic design experience. Software programming experience, especially in Labview, C++ or assembler would be ideal as would knowledge of standard statistical analysis methods To apply for this position please contact Lisa Hart on 01582 450054 or LHart@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
DSP Integration Engineer: posted on 01/06/2004
location Berkshire
description C£40k Berks The Client is a large global electronics company and a major player in the mobile phone industry, most recently entering the 3G market. Currently they are looking for an experienced DSP Engineer to work on the integration testing and support for 2.5G platforms. This will involve tracing and debugging of Layer 1 and hardware issues on 2.5G mobile handsets (including algorithm evaluation and the coding, testing, and release of DSP Drivers for specific RF implementation). The successful candidate will gain responsibility for the configuration management and delivery of DSP software builds into product and platform developments. To be considered for this career enhancing role you should hold a good degree in Electronics (or similar). You will have more than 3 years post-graduate working of embedded C/and or Assembler in a real time environment and experience of physical layer development, integration and testing for GSM for handsets. You should also be used to using integration tools (emulators, logic analyzers, test equipment, etc.). The role offers great potential to experience overseas culture with international travel for on-site support and platform debugging to external sites. If you hold the necessary skills and would like to be part of a large successful global company then call Guy Brown today on 01582 878807 or mail your CV to GBrown@Redlineplc.com For details of all our vacancies, please visit our website at www.redlineplc.com
skills
RF Networks (integrator/Prover): posted on 21/05/2004
location England Portsmouth
description Technical specialist in Terrestial & RF networks for Systems Integration & Proving team. You will be responsible for ensuring team specify, write & run appropriate tests for requirements compliance by leadership, example & review. You have background as end to end system integrator/system proving engineer, not subsystem or product testing & have turned requirements into design architectures. (digital, analogue communications & protocols - TCP/IP, ATM, Modems, RF (RX&TX) Cryptographic systems)
skills RF, integration, proving
RF Contractor: posted on 20/05/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description Were looking for an RF contractor for around 6 months, refining and debugging of existing architecture, system design and system test reporting, system testing for IC on a system evaluation board then full system test on boards relevant to GSM/EDGE. RF System design / RF Circuit design, PCB Layout and EDGE / GSM experience required. Please call IC Resources on 0208 400 2444 or email james@ic-resources.co.uk
skills contract, contractor, RF, systems, board, pcb, GSM, EDGE, RF, architecture, evaluation, boards, IC, test.
Senior Electrical/RF Engineer: posted on 07/05/2004
location England portsmouth
description sought by defence company to provide focus for all Electrical/RF activities on satellite. You will organise & control team of electrical engineers (preparation phases), & determine resources deployment. Will be responsible for delivery of procedures, plans, tools, testing & ensuring non-conformances recorded & actioned. You have Automated Test experience in communications & manufacturing/test areas. Min. 3 yrs senior engineer experience, excellent RF skills. Some shift, weekend & overseas work
skills rf, test
EMC Engineers – all levels: posted on 07/05/2004
location England Hampshire, Sussex, Surrey
description Major research defence organisation seeks EMC Engineers of all levels. They seek EMC Test Engineers and EMC Project Engineers to be responsible for product assurance solutions and testing of high value and complex systems for military and commercial markets. You will be involved in product testing, electromagnetic assessments & report preparation for customers. You will need to be qualified to HND/degree level or equivalent with at least one year’s experience in testing products in the military,
skills Skills: EMC, Electromagnetic Compatibility, TEMPEST, DEF STAN 59-41, DEF-STAN 00-35, RTCA DP/160, MIL-STD 461, MID STD 810, EMC Test, EMC Project Engineer, Product Testing, RF Test, UKAS, BS 17025
RF Technician: posted on 07/05/2004
location England Hampshire, Surrey, West Sussex
description Our client is looking for a RF Technician involved in the support and maintenance of the phase 2 and 2+ RF test system (RAMS). The role involves both in-house support and development, assisting customers and where necessary making visits to their sites (world wide). The in house work includes building and testing RF and other electronic sub assemblies, supporting software development engineers and commissioning new systems before they are dispatched to customers. The customer support role involv
skills Build and test hardware subassemblies Assist and liaise with customers to diagnose faults on their systems Commission new systems both in the UK and abroad upport the software Experience of building and testing RF and other hardware subassemblies
Test Systems Engineer: posted on 06/05/2004
location Bedfordshire Essex
description My client a leading supplier of RF, microwave & sensing components & sub-systems. A systems engineer will be responsible for the interpreting project details and developing hardware and software to fulfil the test requirements. This will take the form of commissioning new device types on existing systems, or working as part of a team developing new systems and jigs for non-standard applications. You will be required to develop specialised hardware and software to facilitate electro-optical testing of custom semiconductor devices, Interpret results using standardised methods to verify test system operation, Maintain/calibrate test systems and provide technical support to production test. Min 2 years technical experience and strong practical skills combined with mixed signal electronic design experience. Software programming experience, especially in Labview, C++ or assembler would be ideal as would knowledge of standard statistical analysis methods To apply for this position please contact Lisa Hart on 01582 450054 or LHart@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
RF Networks (integrator/Prover): posted on 05/05/2004
location England Portsmouth
description Technical specialist in Terrestial & RF networks for Systems Integration & Proving team. You will be responsible for ensuring team specify, write & run appropriate tests for requirements compliance by leadership, example & review. You have background as end to end system integrator/system proving engineer, not subsystem or product testing & have turned requirements into design architectures. (digital, analogue communications & protocols - TCP/IP, ATM, Modems, RF (RX&TX) Cryptographic systems)
skills RF, integration, proving
RF Technician: posted on 30/04/2004
location England Hampshire, Surrey, West Sussex
description Our client is looking for a RF Technician involved in the support and maintenance of the phase 2 and 2+ RF test system (RAMS). The role involves both in-house support and development, assisting customers and where necessary making visits to their sites (world wide). The in house work includes building and testing RF and other electronic sub assemblies, supporting software development engineers and commissioning new systems before they are dispatched to customers. The customer support role involv
skills Build and test hardware subassemblies Assist and liaise with customers to diagnose faults on their systems Commission new systems both in the UK and abroad upport the software Experience of building and testing RF and other hardware subassemblies
RF Engineer: posted on 26/04/2004
location Cambridgeshire Melbourn
description RF Engineer is required for our client within the telecommunications industry. Task involves Devise testing, system design and debugging. Knowledge required. RF/PCB Layout, IC design and RF Circuit design
skills .
RF Technician: posted on 23/04/2004
location England Hampshire, Surrey, West Sussex
description Our client is looking for a RF Technician involved in the support and maintenance of the phase 2 and 2+ RF test system (RAMS). The role involves both in-house support and development, assisting customers and where necessary making visits to their sites (world wide). The in house work includes building and testing RF and other electronic sub assemblies, supporting software development engineers and commissioning new systems before they are dispatched to customers. The customer support role involv
skills Build and test hardware subassemblies Assist and liaise with customers to diagnose faults on their systems Commission new systems both in the UK and abroad upport the software Experience of building and testing RF and other hardware subassemblies
RF Contractor: posted on 21/04/2004
location Greater London United Kingdom, London
description Were looking for an RF contractor for around 6 months, refining and debugging of existing architecture, system design and system test reporting, system testing for IC on a system evaluation board then full system test on boards relevant to GSM/EDGE - GSM/EDGE Experience not essential, but RF System design/RF Circuit design and PCB layout are!!! Please call IC Resources on 0208 400 2444 or email james@ic-resources.co.uk
skills contract, contractor, RF, systems, board, pcb, GSM, EDGE, RF, architecture, evaluation, boards, IC, test.
RF Contractor: posted on 21/04/2004
location Greater London United Kingdom, London
description Were looking for an RF contractor for around 6 months, refining and debugging of existing architecture, system design and system test reporting, system testing for IC on a system evaluation board then full system test on boards relevant to GSM/EDGE - GSM/EDGE Experience not essential, but RF System design/RF Circuit design and PCB layout are!!! Please call IC Resources on 0208 400 2444 or email james@ic-resources.co.uk
skills contract, contractor, RF, systems, board, pcb, GSM, EDGE, RF, architecture, evaluation, boards, IC, test.
RF Design Engineers - junior engineer to project leader leve: posted on 20/04/2004
location Gloucestershire
description £25k-£50k Gloucs These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products. Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design. You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment. For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff. You must be a British passport holder and able to obtain security clearance in order to be considered for these roles. To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
EMC Engineers – all levels: posted on 19/04/2004
location England Hampshire, Sussex, Surrey
description Major research defence organisation seeks EMC Engineers of all levels. They seek EMC Test Engineers and EMC Project Engineers to be responsible for product assurance solutions and testing of high value and complex systems for military and commercial markets. You will be involved in product testing, electromagnetic assessments & report preparation for customers. You will need to be qualified to HND/degree level or equivalent with at least one year’s experience in testing products in the military,
skills Skills: EMC, Electromagnetic Compatibility, TEMPEST, DEF STAN 59-41, DEF-STAN 00-35, RTCA DP/160, MIL-STD 461, MID STD 810, EMC Test, EMC Project Engineer, Product Testing, RF Test, UKAS, BS 17025
RF Technician: posted on 15/04/2004
location England Hampshire, Surrey, West Sussex
description Our client is looking for a RF Technician involved in the support and maintenance of the phase 2 and 2+ RF test system (RAMS). The role involves both in-house support and development, assisting customers and where necessary making visits to their sites (world wide). The in house work includes building and testing RF and other electronic sub assemblies, supporting software development engineers and commissioning new systems before they are dispatched to customers. The customer support role involv
skills Build and test hardware subassemblies Assist and liaise with customers to diagnose faults on their systems Commission new systems both in the UK and abroad upport the software Experience of building and testing RF and other hardware subassemblies
Production & Design Support Engineer: posted on 08/04/2004
location England Hampshire
description Our client, a small but well established firm, are looking to expand and need an Engineer to provide support to both the Design and Manufacturing teams. The role will include test and repair of a wide range of equipment including audio, RF etc, preparation of manufacturing work sheets and test procedures for the manufacturing team and will also include building of prototypes and testing of designs for the design team.
skills rf test production support prototype
Conformance Engineer: posted on 08/04/2004
location Cambridgeshire
description £Excellent Cambs Our client is the leading supplier of Tetra radio terminals to the public safety market. They require an enthusiastic Conformance Engineer to be responsible for testing of radio equipment. You will also be required to test company products to ensure compliance to RF and EMC specifications, arrange/assist/monitor sample testing at external test houses, in terms of RF, EMC, SAR, Safety, Audio and Fit for Purpose Testing, Produce all necessary test reports/documentation to demonstrate compliance of products prior to and during formal conformance testing and take control of the day to day management of the developments test equipment calibration and repair programme You must have knowledge of Tetra combined with previous experience testing radio equipment, and have a working knowledge of current RF, EMC, SAR and Safety Specifications. To apply for this position please contact Lisa Hart on 01582 450054 or LHart@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
EMC Engineers – all levels: posted on 07/04/2004
location England Hampshire, Sussex, Surrey
description Major research defence organisation seeks EMC Engineers of all levels. They seek EMC Test Engineers and EMC Project Engineers to be responsible for product assurance solutions and testing of high value and complex systems for military and commercial markets. You will be involved in product testing, electromagnetic assessments & report preparation for customers. You will need to be qualified to HND/degree level or equivalent with at least one year’s experience in testing products in the military,
skills Skills: EMC, Electromagnetic Compatibility, TEMPEST, DEF STAN 59-41, DEF-STAN 00-35, RTCA DP/160, MIL-STD 461, MID STD 810, EMC Test, EMC Project Engineer, Product Testing, RF Test, UKAS, BS 17025
Production & Design Support Engineer: posted on 05/04/2004
location England Hampshire
description Our client, a small but well established firm, are looking to expand and need an Engineer to provide support to both the Design and Manufacturing teams. The role will include test and repair of a wide range of equipment including audio, RF etc, preparation of manufacturing work sheets and test procedures for the manufacturing team and will also include building of prototypes and testing of designs for the design team.
skills rf test production support prototype
Communications Engineers x12: posted on 23/03/2004
location England Portsmouth
description Different communication specialists sought by space company working on: Integration of system elements into realisation, management of functional & electrical internal/external interfaces, end to end integration (baseband, modem, RF security). Also payload systems, ground systems, end to end network performance testing, requirements verification & traceability (DOORS) , system test strategy development & VV&T plan documentation. You have 5 yrs post grad experience in any of the above disciplines
skills communications
EMC Engineers – all levels: posted on 23/03/2004
location England Hampshire, Sussex, Surrey
description Major research defence organisation seeks EMC Engineers of all levels. They seek EMC Test Engineers and EMC Project Engineers to be responsible for product assurance solutions and testing of high value and complex systems for military and commercial markets. You will be involved in product testing, electromagnetic assessments & report preparation for customers. You will need to be qualified to HND/degree level or equivalent with at least one year’s experience in testing products in the military,
skills Skills: EMC, Electromagnetic Compatibility, TEMPEST, DEF STAN 59-41, DEF-STAN 00-35, RTCA DP/160, MIL-STD 461, MID STD 810, EMC Test, EMC Project Engineer, Product Testing, RF Test, UKAS, BS 17025
Production Test Engineers x2: posted on 19/03/2004
location England Portsmouth
description sought by leading Space company to test electronic & RF subsystems, responsible for quality control of test results & documentation, initial fault diagnosis & raising of non-conformance reports. There will be shiftwork and overtime including nightshifts. You will have HND+ and 5 yrs+ experience in RF, Microwave & digital test techniques of space products in a clean room environments, fault finding to component level, ATE & manual test systems.
skills testing, electronics, RF, Microwave
Test Engineer: posted on 19/03/2004
location England Hampshire
description Our client, a leading compliance solutions provider, is looking to recruit an EMC Test Engineer, who, once trained, will carry out EMC testing to both military and commercial specifications, including automotive, medical and telecoms. To enable you to succeed in this role, you will require an electronics test and repair background ideally with experience within a RF environment. The most important qualities for this role will be the ability and willingness to learn, grasp new ideas and technol
skills emc test electronics rf
Conformance Engineer: posted on 17/03/2004
location Cambridgeshire
description £Excellent Cambs Our client is the leading supplier of Tetra radio terminals to the public safety market. They require an enthusiastic Conformance Engineer to be responsible for testing of radio equipment. You will also be required to test company products to ensure compliance to RF and EMC specifications, arrange/assist/monitor sample testing at external test houses, in terms of RF, EMC, SAR, Safety, Audio and Fit for Purpose Testing, Produce all necessary test reports/documentation to demonstrate compliance of products prior to and during formal conformance testing and take control of the day to day management of the developments test equipment calibration and repair programme You must have knowledge of Tetra combined with previous experience testing radio equipment, and have a working knowledge of current RF, EMC, SAR and Safety Specifications. To apply for this position please contact Lisa Hart on 01582 450054 or LHart@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
GSM/GPRS Senior Test Engineer (PTCRB and GCF) - RF Handheld Products - Waterloo, Ontario, Canada -: posted on 15/03/2004
location UK CANADA
description CLIENT is a world leader in the mobile communications market and has a history of developing breakthrough wireless solutions. We are seeking driven individuals who can take our wireless data products to the next level in the global wireless market. ROLE The successful candidate will be testing digital mobile phones (GSM/GPRS/EDGE) including technical consulting and project management, product assessment and complete verification of samples. This will include generation of test plans and reports validation maintenance and supervision of complex test systems involvement in international standards for testing wireless devices, approval processes and certification bodies (requires travel) other duties related to trouble shooting of samples and test equipment.
skills PERSON - higher weighting more important 10 - 3+ years experience in PTCRB and GCF testing of wireless devices 9 - Bachelor's degree in Electrical Engineering (or equivalent experience) 9 - Project management skills 9 - Must be able to work on several projects simultaneously 9 - The capability of working with minimal supervision as part of a multi-disciplinary team 9 - Possess a strong work ethic and desire to get the job done 9 - Willing to travel as required for product approvals/certifications/trials If you're driven to take wireless technologies to the next level, it's time you join our team We offer a challenging environment that fosters creativity and rewards excellence. Employees also have use of our award winning products
Communications Engineers x12: posted on 12/03/2004
location England Portsmouth
description Different communication specialists sought by space company working on: Integration of system elements into realisation, management of functional & electrical internal/external interfaces, end to end integration (baseband, modem, RF security). Also payload systems, ground systems, end to end network performance testing, requirements verification & traceability (DOORS) , system test strategy development & VV&T plan documentation. You have 5 yrs post grad experience in any of the above disciplines
skills communications
Communications Engineers x12: posted on 05/03/2004
location England Portsmouth
description Different communication specialists sought by space company working on: Integration of system elements into realisation, management of functional & electrical internal/external interfaces, end to end integration (baseband, modem, RF security). Also payload systems, ground systems, end to end network performance testing, requirements verification & traceability (DOORS) , system test strategy development & VV&T plan documentation. You have 5 yrs post grad experience in any of the above disciplines
skills communications
DSP Integration Engineer: posted on 04/03/2004
location Berkshire
description C£40k Berks The Client is a large global electronics company and a major player in the mobile phone industry, most recently entering the 3G market. Currently they are looking for an experienced DSP Engineer to work on the integration testing and support for 2.5G platforms. This will involve tracing and debugging of Layer 1 and hardware issues on 2.5G mobile handsets (including algorithm evaluation and the coding, testing, and release of DSP Drivers for specific RF implementation). The successful candidate will gain responsibility for the configuration management and delivery of DSP software builds into product and platform developments. To be considered for this career enhancing role you should hold a good degree in Electronics (or similar). You will have more than 3 years post-graduate working of embedded C/and or Assembler in a real time environment and experience of physical layer development, integration and testing for GSM for handsets. You should also be used to using integration tools (emulators, logic analyzers, test equipment, etc.). The role offers great potential to experience overseas culture with international travel for on-site support and platform debugging to external sites. If you hold the necessary skills and would like to be part of a large successful global company then call Guy Brown today on 01582 878807 or mail your CV to GBrown@Redlineplc.com For details of all our vacancies, please visit our website at www.redlineplc.com
skills
RF Design Engineers - junior engineer to project leader leve: posted on 03/03/2004
location Gloucestershire
description £25k-£50k Gloucs These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products. Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design. You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment. For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff. You must be a British passport holder and able to obtain security clearance in order to be considered for these roles. To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com. For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
Communications Engineers x12: posted on 20/02/2004
location England Portsmouth
description Different communication specialists sought by space company working on: Integration of system elements into realisation, management of functional & electrical internal/external interfaces, end to end integration (baseband, modem, RF security). Also payload systems, ground systems, end to end network performance testing, requirements verification & traceability (DOORS) , system test strategy development & VV&T plan documentation. You have 5 yrs post grad experience in any of the above disciplines
skills communications
EMC Test Engineer: posted on 17/02/2004
location England Hampshire
description Our client, a leading compliance solutions provider, is looking to recruit an EMC Test Engineer, who, once trained, will carry out EMC testing to both military and commercial specifications, including automotive, medical and telecoms. To enable you to succeed in this role, you will require an electronics background with experience within a RF environment. The most important qualities for this role will be the ability and willingness to learn, grasp new ideas and technologies and be flexible en
skills electronics rf test
Junior Software Test: posted on 15/02/2004
location England Bristol
description You will Assist the testing department with structured tests on a variety of digital TV platforms. Ideal Candidates will have at least one years experience in an IT or software testing environment. Able to work well with a diverse team of engineers. Knowledge of some or all of the following advantageous: Microsoft Windows OS and Office packages RF and computer network cabling Digital TV via terrestrial or satellite networks
skills one years experience in an IT or software testing environment. Able to work well with a diverse team of engineers. Knowledge of some or all of the following advantageous: Microsoft Windows OS and Office packages RF and computer network cablin

Contact Us | Add a Job

About UKWorkSearch.com

UKWorkSearch.com was built by Dan Winchester as a guide to finding a job online, and is run by Labworks Ltd. Other online guides which you might find useful include UKShopSearch.com for online shopping, QuoteSearch.co.uk for insurance, UKTV.tv for UK TV listings, and AllTheAgents.com for estate agents and other resources related to moving house. If you are in business you may find Serviced.co.uk useful for finding office space, and if you travel a lot UKRoomSearch.com is handy for hotel rooms. Finally, if you need a loan try loan.org.uk.

rf and testing jobs - search results for rf and testing jobs

Home

Search [ Popular Searches ]