Click here to visit
our list of resources!
UK Accounting Jobs
Childcare Jobs
Engineering Jobs
|
 |
|
|
Searched in jobs for keywords engineering
Results are ordered by date. Older jobs are included as that agency may have other jobs that fit the search: engineering.
Click the job you want more information on:
- Platform Software integration Engineer
- posted on 12/07/2004
location UK Munich
description Education: Technical university/College Engineering degree (computer science, Electrical Engineering) preferably but not mandatory. Professional experience: Min. 5 years
Required knowledge: Extensive embedded programming experience in C Thorough knowledge of at least one RTOS and of RTOS Principles. Experience of Designing?developing/Testing low level SW drivers
Desired Skills: Integration of 3rd party multi-media SW, SW optimization (speed), ARM7/9 processor architecture, JTAG debugging
skills C, RTOS. Embedded
- R&D Engineer - Telecoms
- posted on 12/07/2004
location England Surrey, South East, England, UK
description This forward thinking consultancy, specializing in software/hardware development in Telecoms markets are seeking an exceptional R&D Engineer with an excellent academic background, including a PhD, or at least 5 years experience of Hardware and Software Engineering in some of the following areas: Wireless Comms Systems, Satellite Comms, Modem Design, DSP, GPS, GIS or Spatial Data Systems.
skills Telecoms, GIS, Satellite Comms, Wireless
- RF Design Engineers - junior engineer to project leader leve
- posted on 12/07/2004
location Gloucestershire
description RF Design Engineers - junior engineer to project leader level
£25k-£50k
Gloucs
These roles involve the design, development, technical leadership & integration of RF circuitry (LF to 3GHz) for communications products.
Key tasks will cover: Frequency and gain planning of up and down conversion paths, receiver & filter design, power amplifier & PLL synthesiser design, design and/or component selection of other signal path elements, eg amplifiers, mixers, etc, interfacing to signal processing sections, eg DAC, ADC
Project implementation will include: PCB layout (usually liaising with a PCB draughtsman), screening and mechanical arrangements, testing and qualification of prototype designs, integration of designs with other system elements, documentation, eg design specifications, test specifications
It is essential you should have proven experience in RF circuitry design, implementation & integration into communications products. This should have covered modern surface-mount components, and ideally will have covered screening, housing, interface and interconnect design.
You should also have experience of usng RF test instrumentation and RF simulation/modelling while working in a small multidisciplinary team environment. Ideally you will have specific exposure to ground segment satellite comms equipment.
For technical leader roles you should have experience in managing small multi-disciplinary teams of engineers and support staff.
You must be a British passport holder and able to obtain security clearance in order to be considered for these roles.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com
For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
- DSP Engineers Grad, Jnr, Snr, Guru
- posted on 12/07/2004
location Devon Gloucestershire
description I'm particularly keen to find a DSP guru, but I'm also looking for less experienced candidates in this technical field.
It is essential that you have good mathematical skills and exposure to the simulation & development of DSP software algorithms for real-time communications. This may have been gained on a degree project if you are a recent graduate, or you will have 5 or more years of commercial/industrial experience if you are looking to enter at a senior level.
Your knowledge of assembler coding and optimisation is likely to have been gained in the telecoms field, ideally defence or satcoms - possibly in connection with signal modulation/demodulation.
Any specific experience of the Motorola 563xx processor family & DSP theory would be useful. It would also be advantageous if you had any exposure to high speed digital hardware design such as processors, peripherals, ADC's/DAC's etc.
You must be a British passport holder and able to obtain security clearance in order to be considered for these roles.
skills
- Senior Mechanical Design Engineer
- posted on 12/07/2004
location Buckinghamshire M40, Buckinghamshire
description My client is a world leader in the development of analytical instrumentation and systems and they are currently looking to recruit experienced Senior Mechanical Engineers.
This position is specifically to design, develop and support the mechanical engineering components and systems within multi-disciplinary product development teams.
You should be degree educated with a minimum of 5 years experience in mechanical design in the development and manufacture of electro-mechanical equipment, and detailed knowledge and experience of Pro-Engineer.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com
For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
- Software Quality Assurance Engineer
- posted on 12/07/2004
location Buckinghamshire
description Software Quality Assurance Engineer
C£25k-£35k
M4/M40 corridor
Your role will be to ensure that completed software meets customer expectations.
The principal responsibilties will be concerned with writing test plans, test cases and test procedures to ensure high quality software and systems.
You will also be involved in developing and publishing detailed test procedures and keeping them under change control, in addition to performing the detailed tests and documenting results.
You should have a relevant degree or equivalent experience, and experience in the quality assurance of software in a relevant industry. It is essential you have knowledge of GMP and GLP requirements and familiarity with ISO 9000 and quality documentation.
You should have evidence of problem solving skills as well as good interpersonal skills.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com
For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
- Service management process consultant
- posted on 10/07/2004
location Bedfordshire United Kingdom, South East
description Excellent contract opportunity for an ITIL qualified person to join this prestigious client as a service management process consultant. The contract will last approx 9 months and you will be required to work in teams of 2-3 on a project basis- updating standard processes and procedures. We require ITIL qualified candidates with at least 5 years experience in service delivery within the desktop outsourcing environment, including exposure to dealing with commercial customers. Your background should include experience/knowledge of incident management, inventory management & security;process re-engineering; writing/agreeing processes/procedures and operational service management. Candidates must have an appreciation of Management Information Reporting, ability to work in a fluid environment and experience of defining and specifying service requirements. To apply please e-mail your CV with a brief cover note.
skills ITIL, project, senior, MIS reporting,
- Service, Commissioning Engineer
- posted on 09/07/2004
location England South West, Bristol, Somerset
description Our client is a market leader in emergency lighting and fire detection systems and is currently seeking a service or commissioning engineer to be based from home but covering the South West. Suitable candidates will have experience in the commissioning and service of conventional and analogue fire systems and emergency lighting. Ideally you will have served a relevant apprenticeship or have a suitable City & Guilds qualification. Experience would be preferred although Electricians with installat
skills Security, Service, Emergency Lighting, Prevention, Alarm, Access, Vacancies, Electrician, Fire, Installation, Security Lighting
- Service & Installation Engineers
- posted on 09/07/2004
location England Worcester, West Midlands
description Our client is experienced in installing, servicing and maintaining fire and security systems and are currently seeking Service and Installation Engineers experienced in a variety of installations and maintenance. Systems covered must include Fire Alarms, Access Control and CCTV Systems. Suitable candidates will have a minimum of three years experience within the fire or security industry within a similar role. Must be flexible with regards to working hours and location. Ideal candidates will res
skills Security, Service, Fire, Alarms, Installation, Maintenance, Service, CCTV, Access Control, Camera’s, vacancies, Addressable, Conventional
- Intruder Alarm Engineer
- posted on 09/07/2004
location England Leicestershire, Cambridgeshire
description Established international Fire and Security Organisation currently seeking engineers confident in both service and installation duties on a variety of intruder alarm systems and panels. Ideal applicants will have a minimum of 3 years hands on intruder alarm engineering experience and be looking to enhance their career within a rapidly growing company. Experience of various intruder alarm equipment would be an advantage; ie; Galaxy, Scantronic etc. Summary: Intruder, Alarm , service, installation
skills Galaxy, Scantronic etc. Summary: Intruder, Alarm , service, installation, commissioning, engineer, alarm, menvier, scantronic, galaxy
- Fire Alarm Engineer
- posted on 09/07/2004
location England Middlesex, Surrey, London
description Our Client is currently seeking a Fire Alarm engineer with a minimum of three years experience in the fire alarm industry covering the installation, service and maintenance of a variety of fire alarm systems and panels. Ideal candidates will have an electrical qualification (ie city & guilds or 16th Edition). Candidates must be flexible with regards to working locations. Excellent Salary available + Car/Van, overtime, callout and additional benefits. Summary: Security, Service, Fire, Alarms, In
skills Security, Service, Fire, Alarms, Installation, Maintenance, Vacancies, Addressable, Conventional
- Security Engineer
- posted on 09/07/2004
location England Slough, Middlesex, Surrey, Buckinghamshire
description Security Engineers to be based from southern branch. You will ideally have a minimum of three – four years hands on engineering experience within the security industry and be familiar with systems and equipment such as Intruder Alarms, Access Control and CCTV systems. Must be flexible with regards to working hours and locations.
skills Security, Service, CCTV, Prevention, Intruder, Alarm, Access, Vacancies, Electrician, Galaxy, Scantronic, Camera’s, Management, Installation, Supervisory, Team Leader
- CCTV Engineer
- posted on 09/07/2004
location England Nottingham, Nottinghamshire, Derby, Derbyshire, Le
description Our client has been providing equipment and expertise in CCTV, Access Control and Security Systems to a wide industrial and commercial customer base for more than 30 years. Currently a seeking an Installation or Service Engineer with a minimum of three years experience covering the service or installation of a variety of CCTV cameras and equipment. Ideal candidates will also ideally have experience of Access Control Systems. Suitable candidates will reside within a commutable distance of Nottin
skills CCTV, Access Control, Maintenance, Service, Installation, Engineer, Nottingham, Nottinghamshire, Derby, Derbyshire, Leicester, Leicestershire
- Service/Commissioning Engineer
- posted on 09/07/2004
location Berkshire South East, London, Essex, Kent, Surrey, Sussex, H
description Our independent fire alarm service, installation and maintenance client is currently seeking Service and Commissioning Engineers to join their expanding team in the South East. Ideal candidates will have a minimum of three years experience directly in the fire alarm industry covering service, installation or commissioning. Must be familiar with addressable and conventional fire alarm panels. Excellent basic salaries and packages available to suitable applicants. Summary: Fire Alarms, Panels, Add
skills Fire Alarms, Panels, Addressable, Maintenance, Conventional, Alarms, South East, London, Essex, Kent, Surrey, Sussex, Hampshire Berkshire
- Service Engineer
- posted on 09/07/2004
location Oxfordshire Oxfordshire, Oxford
description Our Independent Security client is currently seeking Service Engineers with a background in the installation and service of CCTV Systems, Access Control and Intruder Alarms. Suitable candidates will have a minimum of four years experience within the industry and be qualified to minimum City and Guilds standard Electrical Engineering or similar. Excellent Salaries and company benefits available for suitable candidates. Excellent opportunity for an enthusiastic engineer with a modern, growing orga
skills Summary: Security, Intruder, Service, Maintenance, CCTV, Alarms, Access Control, Door Entry, Oxford, Oxfordshire, Gloucestershire
- Maintenance Engineer
- posted on 09/07/2004
location England Norfolk
description Our client is currently looking for a Maintenance Engineer (Night shift) to carry out all electrical and engineering maintenance activities with input to the continual development and improvement of the department operational activities and functions. The hours of work will be Sun-Thur 10.00pm - 6.00am. We are looking to hear from applicants with previous production maintenance experience and 16th Edition qualifications.
skills 16th Edition Qualifications and previous production maintenance experience.
- Team Co-ordinator (FMCG)
- posted on 09/07/2004
location England London
description Our Client is currently looking for a Team Co-coordinator with experience in the food and beverage (FMCG) Industry.
The Team co-ordinators will be responsible for developing the capability of the operations team to develop best industry standards.
We would like to hear from applicants who have a CMS, HNC with preferably an engineering background along with 2 years experience in an engineering and/or leadership capacity within a FMCG environment.
skills We would like to hear from applicants with the ability to solve problems and knowledge of desktop systems. Good planning, organising, time management and co-ordination skills are essential.
- Marketing Executive
- posted on 09/07/2004
location England Hampshire
description Our Client is a young are a fast growing company who are looking for a talented and focused marketing executive to join their fast-moving team. Working across a range of key products, the successful candidate will have at least two years experience in a results driven marketing environment and will be involved in developing, implementing and monitoring a variety of direct marketing activities designed to generate cost-effective leads for the business.
Candidates must be educated in the discipli
skills Candidates must be educated in the disciplines of direct marketing, organized, have an eye for detail, and be confident and pro-active team player who is able to work unsupervised when required. You must be able to deal with demanding workloads, mana
- Lead Team Technician
- posted on 09/07/2004
location England London
description Our client is currently looking for a Lead Team Technician to work as part of the engineering function to action and develop maintenance practices to ensure best industry standards for reliability, wastage and cost effectiveness within the plant.
We would like to hear from applicants with Electrical/Mechanical qualifications and FMCG production line experience.
skills We would like to hear from applicants with Electrical/Mechanical qualifications and FMCG production line experience.
Multi Skilled including Mechanical & Electrical.
- Air Conditioning Engineer
- posted on 09/07/2004
location England Surrey, South London, Middlesex
description Our client is an established air conditioning install, service and maintenance company who operate in Hampshire, Surrey, London and Berkshire. They currently require an air conditioning service engineer to join their team to work within Berkshire, Surrey, South London and Middlesex.
skills You will have a minimum of 5 years experience with relevant qualifications including refrigerant handling. You must hold a full driving license for this position
- Air Conditioning Engineer
- posted on 09/07/2004
location England Central London
description Our Client is one of the south’s commercial refrigeration, air conditioning and catering experts who provide installation, service and maintenance to their customers and manufacturee equipment to bespoke requirements. They currently require an experienced A/C eengineer to work within Central London servicing equipment such as Splits and VRV's. To apply for this position or for more information please call Gary on 02392 374444
skills The right applicant will be either time served or apprentice trained with relevant qualifications, which must include refrigerant handling. You must hold a currrent Drivers License.
- Marketing Assistant
- posted on 09/07/2004
location England Hampshire - Waterlooville
description Our Client is a young, fast growing company who are looking to recruit a marketing assistant. This position offers the first step into the world of marketing for an intelligent, outgoing individual who is prepared to work their way up the career ladder. To be considered for this position you must be educated to degree level with strong English and Math’s skills.
The successful applicant will be keen and enthusiastic with a general interest in marketing. Experience is not essential for this posi
skills To be considered for this position you must be educated to degree level with strong English and Math’s skills.
The successful applicant will be keen and enthusiastic with a general interest in marketing. Experience is not essential for this position
- HVAC Service Technician
- posted on 09/07/2004
location England Hampshire, Basingstoke
description Our Client is a leading global provider of indoor comfort systems and comprehensive facility solutions. The company offer energy efficient heating, ventilating and air conditioning (HVAC) systems, top-notch service and parts support, sophisticated building controls and financial solutions
They currently require HVAC Service Technician's to be based in Basingstoke to carry out planned and unplanned service, maintenance, and commissioning of all types of water chiller plant, AHUs, and Unitary Air
skills Suitable candidates must be experienced in working with screw, scroll and centrifugal water chillers, strong on electrics, sound working knowledge of refrigeration, and most of all to be willing to work well within a good strong team.
You must be t
- Field Refrigeration/AC Service Engineer
- posted on 09/07/2004
location Oxfordshire Oxford
description Our client is a well-established company operating successfully for 21 years, who specialise in installing and maintaining air conditioning and refrigeration systems for commercial, residential and industrial use. They are currently after a field based refrigeration and air conditioning engineer to cover the Oxford area, installing, servicing and maintaining commercial, residential and industrial equipment such as splits, cold rooms, VRV's, cold cabinets and chest freezers. Most of the equipment
skills The ideal candidate will hold refrigeration qualifications including Refrigerant Handling and poses a minimum of 5 years previous experience in a similar role. Must live within commutable distance from Oxford.
- Customer Support Technician
- posted on 09/07/2004
location England Portsmouth, Hampshire
description Internal Sales to co-ordinate incoming calls and manage a spare parts department. For this position we will consider engineers to move into this market, and the ideal experience will be in the HVAC market. Working hours are 8.30 - 5pm with 4pm finish Fridays and 25 days holiday. Good opportunity for your first step from engineering into sales, or exp internal sales looking for a move.
skills Building Services Knowledge - HVAC, Would suit a graduate.
- M&E Engineer
- posted on 09/07/2004
location England Newbury
description Our client is a well-established national Facilities Management company looking to recruit a multi-skilled M&E Engineer to work on a major contract with a blue chip company in Berkshire. You will be required to visit several sites over a 15-mile radius, performing routine and planned preventative maintenance. You will be an experienced M&E Engineer within a building services environment; relevant city and guilds qualifications in air conditioning and refrigeration are essential as is the 16th ed
skills You will be an experienced M&E Engineer within a building services environment; relevant city and guilds qualifications in air conditioning and refrigeration are essential as is the 16th edition electrical qualification. Will be required to work nigh
- Service Engineer
- posted on 09/07/2004
location Wales South West Wales
description Our Client is a world leader in manufacturing, selling, installing and servicing merchandising equipment and refrigeration systems to customers in over 80 countries. They are currently looking for a Service Engineer to carry out maintenance and reactive service of refrigeration equipment for customers. This role involves visiting customer sites and diagnosing and repairing refrigeration electrical faults. Will involve communication to the store staff is essential to ensure they are aware of job
skills The candidate will have completed a recognised apprentiship or have a minimum of 3 years field experience and experience in a variety of refrigeration equipment. Current refrigeration handling and electrical qualification is desirable.
The Candidat
- Air Conditioning Engineer
- posted on 09/07/2004
location West Midlands (Birmingham) Midlands - Will be working Nationwide so working a
description Our Client are specialists in air conditioning, ducting and commercial refrigeration. The company is rapidly growing and now have a requiremant for an experienced air conditioning installation engineer to join their team. The role will involve the install and other assosiated tasks of ac equipment such as splits, VRV, VRF's. You will be based in the midlands but will be required to work on a national basis where working away from home will be required. The right candidate should be ambitious, l
skills The right candidate should be ambitious, live in the midlands area, have a minimum of 5 years experience in a similar role and hold relevant qualifications including a current gas handling certificate.
- Senior A/C Project Engineer
- posted on 09/07/2004
location England Surrey
London
Hampshire
description Our client is a well established air conditioning & M&E design, installation and planned maintenance company who are based in the South of England. They currently require an experienced project engineer to join their team. If you have proven experience as a project manager within the Air Conditioning Industry we would like to hear from you.
This position offers good rates of pay and benefits
skills Benefits = Car (FE), 3 weeks holiday rising to 4, Pension, Healthcare, Mobile.
- Service Engineer - Refrigeration & Air Conditionin
- posted on 09/07/2004
location England Essex
description Our client is a well-established small family run company specialising in the install, service and maintenance of refrigeration and air conditioning equipment within the Essex region. They currently require a multi skilled engineer to join their team, to be based nr Grays - Essex and work within a 40 mile radius (not London). The right candidate will be experienced in the install, service and repair of commercial refrigeration equipment such as bottle coolers, ice machines, cold rooms etc. You w
skills You must have relevant experience in the install, service of commercial refrigerationm and split type ac equipment, be flexible and committed to the job. Applicants must hold relevant safe handling certificate.
- General Assistant
- posted on 09/07/2004
location England Newbury, Berkshire
description Our client is a well-established FM company looking to recruit a General Assistant to carry out handyman tasks along side a more experienced work mate. This position requires no technical knowledge although general knowledge of Heating and ventilation is desired.
The position will require work at nights every few weeks due to accessibility, so flexibility is a must.
skills This position requires no technical knowledge although general knowledge of Heating and ventilation is desired.
The position will require work at nights every few weeks due to accessibility, so flexibility is a must.
- Service Engineer Air Conditioning
- posted on 09/07/2004
location England Surrey / London
description Our Client is a specialist refrigeration and air conditioning company that offer installation, maintenance and reactive service on all types of refrigeration and air conditioning equipment ranging from a single split system to complex VRV systems to large central plant chillers and associated building services.
They are currently looking for an experienced air conditioning engineer to be based in the London/Surrey area. The ideal candidate will have at least 2 years experience in the service of
skills The ideal candidate will have at least 2 years experience in the service of Split systems, VRV's and preferably chillers with relavent qualifications NVQ/C&G including safe handling of refrigerants. Candidates should have a valid driving licence, be
- Refrigeration and Air conditioning Service Enginee
- posted on 09/07/2004
location Greater London Central London / M25
description Our Client is established Refrigeration & Air Conditioning Company who install and service a wide variety of refrigeration and air conditioning in the commercial and industrial industry. They are looking for an experienced field based service engineer to look after clients in the London/M25 area - typically pubs, clubs and restaurants. The ideal candidate will have a minimum of 2 - 3 years experience in a similar role, be experienced in servicing a variety of refrigeration and ac equipment inclu
skills 2 - 3 years experience in servicing refrigeration and air conditioning equipment. Full UK Driving License, Energetic.
- Air Conditioning Service & Maintenance Engineer
- posted on 09/07/2004
location England Bristol and surrounding area's
description Our Client is a refrigeration and air conditioning service, maintenance and installation contractor who are fast on their way to becoming the largest in the UK. They currently require engineers to be based in Bristol to carry out service and maintenance work on AC equipment, which consists of mainly splits but also water chillers and VRV's.
skills To be considered for this role you must be either time served or apprentice trained, hold relevant qualifications, which must include refrigerant handling, be flexible in your approach and have a positive approach to your work.
- Air Conditioning Service & Maintenance Engineer
- posted on 09/07/2004
location England Northants and surrounding areas
description Our Client is a refrigeration and air conditioning service, maintenance and installation contractor who are fast on their way to becoming the largest in the UK. They currently require engineers to be based in Northamptonshire to carry out service and maintenance work on AC equipment, which consists of mainly splits but also water chillers and VRV's.
skills To be considered for this role you must be either time served or apprentice trained, hold relevant qualifications, which must include refrigerant handling, be flexible in your approach and have a positive approach to your work. Our client does not op
- Industrial Refrigeration Engineer
- posted on 09/07/2004
location Greater London London and Home Counties
description Our Client specialises in the contract hire of vehicles and supply of portable refrigerated storage units throughout the UK, serving a variety of industry sectors. They currently require an experienced engineer to carry out service and maintenance work on walk in freezer and cold room units around London and Home Counties. The right applicant will be time served, with good knowledge of industrial refrigeration equipment and will be qualified including a CITB or C&G safe handling certificate.
skills The right applicant will be time served, with good knowledge of industrial refrigeration equipment and will be qualified including a CITB or C&G safe handling certificate.
- Air Conditioning Service & Maintenance Engineer
- posted on 09/07/2004
location England Central London
Inside M25 considered
description Our Client is a refrigeration and air conditioning service, maintenance and installation contractor who are fast on their way to becoming the largest in the UK. They currently require engineers to be based in Central London to carry out service and maintenance work on AC equipment, which consists of mainly splits but also water chillers and VRV's. If you feel you are relevant for this position or would like to know more please call Gary on 02392 374444.
skills To be considered for this role you must be either time served or apprentice trained, hold relevant qualifications, which must include refrigerant handling, be flexible in your approach and have a positive approach to your work. If you feel you are re
- HVAC Service Technician
- posted on 09/07/2004
location England Calderdale
description Our Client is a leading global provider of indoor comfort systems and comprehensive facility solutions. The company offer energy efficient heating, ventilating and air conditioning (HVAC) systems, top-notch service and parts support, sophisticated building controls and financial solutions
They currently require HVAC Service Technician's to be based in Rochdale to carry out planned and unplanned service, maintenance, and commissioning of all types of water chiller plant, AHUs, and Unitary Air-co
skills Suitable candidates must be experienced in working with screw, scroll and centrifugal water chillers, strong on electrics, sound working knowledge of refrigeration, and most of all to be willing to work well within a good strong team.
You must be t
- Air Conditioning Installation and Breakdown Engine
- posted on 09/07/2004
location West Midlands (Birmingham) Birmingham - West Midlands
description Our client is a specialist air conditioning installation and climate control company. They are currently looking for a reliable installation and breakdown engineer to carry out the installation of cassette units and splits and maintenance/breakdown repair of units such as changing pumps etc. You will be based in the West Midlands and hold a Full UK Driving Licence.
skills Installation experience and a general knowledge of AC equipment including splits and cassette units. Driving Licence required.
Qualifications are a benefit especially a safe handling certificate.
Must be a reliable person.
- Senior Service Engineer
- posted on 09/07/2004
location England East Anglia
description Our Client is a world leader in manufacturing, selling, installing and servicing merchandising equipment and refrigeration systems to customers in over 80 countries. They are currently looking for a Senior Service Engineer to work in Ipswich, who will be carrying out maintenance and reactive service of refrigeration equipment for customers. This involves visiting customer sites and diagnosing and repairing refrigeration and electrical faults. The candidate will be responsible for ensuring the en
skills The Candidate will have served a recognised apprentiship and have several years field experience with experience in a variety or refrigeration equipment. Current refrigeration handling certification and electrical qualification is desirable. The Cand
- Service & Maintenance Engineer
- posted on 09/07/2004
location Berkshire Berkshire/Hants
description Our client is a well-established mechanical services company specialising in heating, ventilation and air conditioning with clients based in both the industrial and commercial sectors. The currently require an Air Conditioning Service & Maintenance Engineer to work on a variety of equipment including multi splits, packaged units such as VRV and VRF's and chillers. The right candidate will be based in Basingstoke and will work within a 50-mile radius.
skills The right candidate will have a broad knowledge of AC equipment; have a minimum of 5 yrs experience. Hold at least an NVQ Lv2 in Refrigeration & Air Conditioning. Candidates who also hold an A.C.S qualification are preferable.
- Chiller Service Engineer
- posted on 09/07/2004
location England Leicestershire
description This company is looking for experienced commercial refrigeration engineers to service and maintain process-cooling and
chillers (from 6kw to 250kw in size) systems within factories and production sites. in the. Their business is growing in this area and they are currently servicing from themidlands. They will be working on Process cooling systems and split air conditioning systems. They will based from home ,they will be fault finding and maintaining a variety of equipment including electrical
skills refrigeration engineer exp+knowledge of 'chilled water circuits' and pumps, pressure flow, fluid dynamics+good electrical skill and knowledge of control circuits.
- AC Maintenance Engineer
- posted on 09/07/2004
location Greater London London
description Due to unprecedented growth, our client is currently looking for experienced air conditioning maintenance engineers with some experience on refrigeration equipment such as chillers to work in West London. Candidates should have good communication skills, have at least 5 years experience in either service, maintenance or installation of Splits, VRV's and chillers.
skills AC Experience, Refrigeration would be an asset.
- Refrigeration Service Engineer
- posted on 09/07/2004
location Merseyside Be based in Wirral/Liverpool - to service Nationwi
description Our client is an established refrigeration engineering company who design, install, maintain and service heavy industrial and commercial refrigeration equipment, with clients in the Dairy, Food, Pharmaceutical industries - Nationwide.
They currently require a fully time served service engineer who has worked on heavy industrial or commercial refrigeration equipment such as large chillers, screw compressors, and ammonia plants. The applicant should hold a C&G in refrigeration - refrigerant hand
skills Time spent in HEAVY industrial/commercial refrigeration.
- AC Service/Maintenance Engineer
- posted on 09/07/2004
location Merseyside Yorkshire - will be based in Leeds.
description Our Client delivers Air Conditioning and Mechanical Services to both national and local customers, and enjoy an enviable reputation of delivering projects and services to a wide spectrum of clients in an innovative, flexible and competitive way. They are currently seeking a Air Conditioning service/maintenance engineer to service and maintain commercial and industrial AC equipment including Splits and VRV's in the Yorkshire area. The candidate will also be required to service and maintain some H
skills The ideal candidate will have at least 5 years AC service experience and experience in heating equipment, any ACS qualifications would be an advantage. Gas Safe Handling Certificate is a must.
- Customer Service
- posted on 09/07/2004
location England Hampshire
description Our client is urgently looking for good quality customer service staff, you will be bright keen and motivated and looking for a real career in an expanding company that can offer real prospects. You will have some customer service experience and be capable of liaising with customers and internal staff. You should have a keen sense of knowing who a customer is, coupled with the ability to work in a highly motivated environment where people skills are essential.
skills You will have some customer service experience and be capable of liaising with customers and internal staff. You should have a keen sense of knowing who a customer is, coupled with the ability to work in a highly motivated environment where people sk
- Refrigeration Engineers
- posted on 09/07/2004
location Greater London London
description Our client is a service and maintenance company who specialise in refrigeration equipment such as bottle coolers, walk in fridges and some commercial equipment. They are currently seeking 5 engineers for service roles inside the M25 area, with at least 1 years experience in a refrigeration service role and with some electrical experience. Candidates must be committed, enthusiastic and reliable. Will be expected to work a 40-hour week plus overtime (approx.15hrs a week * 1.5 weekdays *2 weekends)
skills At least 1 years experience in a refrigeration service role and with some electrical experience.
- Service Engineer
- posted on 09/07/2004
location Berkshire Hampshire
Sussex
description Senior/Supervisor field service engineers required by a national refrigeration servicing company. Covering the Hampshire and Sussex areas you will be working on supermarket pack equipment. You will have previous experience working on supermarket refrigeration systems including the control side. The position comes with a company vehicle and attractive benefits package. Salary range quoted is for a basic 40 hour, with plenty of overtime available and additional payments made when required to be o
skills Experienced (5 - 10yrs) supermarket pack engineer with controls experience - pref some electrical skills.
- Refrigeration and Air conditioning Service Enginee
- posted on 09/07/2004
location England Chichester
Weymouth
Oxford
Bristol
description Our Client specialises in the service of refrigeration and air conditioning equipment from small ice machines through to 200hp Air conditioning equipment. They are looking for a mature service engineer to work around Chichester, Weymouth, Bristol and Oxford area's servicing most types of refrigeration, chiller, and A/C equipment for clients such as the NHS, Dairy Crest, and other shops, pubs and hotels.
The ideal candidate will have electrical and mechanical experience in servicing refrigeratio
skills Electrical and mechanical experience in servicing refrigeration and air conditioning equipment, must have an interest in refrigeration and must be a keen and self-motivated individual
- Refrigeration Engineer
- posted on 09/07/2004
location England London
description Our client requires an experienced refrigeration engineer to cover the South London and surrounding area. The company provides routine maintenance and breakdown cover and has a number of major contracts across the south, including large supermarket chains, restaurants and retails outlets. The company regularly have overtime available and provide a company vehicle.
skills . Ideally you have experience of fault finding and repairing supermarket and commercial refrigeration equipment, however the company are also willing to provide training for engineers with at least 3 years light commercial experience.
- Branch Manager
- posted on 09/07/2004
location Greater Manchester Manchester
description Our client has an enviable track record in building and installing systems in a wide variety of market sectors. They provide all refrigeration requirements from chilling through to freezing, including: Plant breakdown, support and servicing, compressor overhauls, technical support, and design and estimating.
They are currently after a Branch Manager to be based in their Manchester branch to ensure the day to day running of a busy department..
The candidate will have good knowledge and time sp
skills Proven Management Experience within the refrigeration Industry is a must. Good Administration Skills & Good Problem Solving Skills.
- HVAC Supervisor
- posted on 09/07/2004
location England Newbury
description Our client, a national Building Management company who currently require an experienced HVAC Supervisor to work on a contract with a blue chip company in Berkshire. You will be required to visit serveral sites over a 15 mile radius, performing tasks from routine and preventative maintenance to fault finding and repair. You will have extensive knowledge of HVAC along with an industry relevant qualification.
Will be required to work nights due to accessibility restrictions.
skills You will have extensive knowledge of HVAC along with an industry relevant qualification. You will also have previous supervisory experience.
- Refrigeration/AC Engineer
- posted on 09/07/2004
location West Midlands (Birmingham) Mainly Birmingham/West Midlands. Possibly Glousest
description Our client is a small but rapidly growing refrigeration and air conditioning sales and service company who specialise in servicing single splits, chillers and commercial cold rooms for pubs, hotels, and restaurants.
They are currently looking for an engineer to cover West Midlands and/or surrounding areas to carryout maintenance, warranty work, and breakdowns. The applicant should hold NVQ II in Refrigeration and Air Conditioning or similar qualification, CITB in refrigerant handling, have some
skills The applicant should hold NVQ II in Refrigeration and Air Conditioning or similar qualification, CITB/C&G in refrigerant handling.
- Air Conditioning Installation Engineer
- posted on 09/07/2004
location England East Midlands - Leicestershire
description Our Client delivers Air Conditioning and Mechanical Services to both national and local customers, and enjoys an enviable reputation of delivering projects and services to a wide spectrum of clients in an innovative, flexible and competitive way. They are currently seeking an Air Conditioning Installation engineer to install commercial and industrial AC equipment including Splits and VRV's. You will be based in Leicester but will travel to various sites across the Country.
licence.
skills The ideal candidate will have at least 5 years AC installation experience in all aspects of the job, hold a UK driving licence. Be keen to do some traveling toc sites.
- AC Service Engineer
- posted on 09/07/2004
location England Leicestershire/ East Midlands
description Our Client delivers Air Conditioning and Mechanical Services to both national and local customers, and enjoy an enviable reputation of delivering projects and services to a wide spectrum of clients in an innovative, flexible and competitive way. They are currently seeking a Air Conditioning service engineer to service and maintain commercial and industrial AC equipment including Splits and VRV's in the Leicester area. The candidate will also be required to service and maintain Heating equipment.
skills The ideal candidate will have at least 5 years AC service experience and experience in heating equipment, any ACS qualifications would be an advantage.
- Air Conditioning Engineer
- posted on 09/07/2004
location England Newbury, Berkshire
description Our client is a well-established national Facilities Management company looking to recruit an experienced Air Conditioning engineer to work on a major contract with a blue chip company in Berkshire. You will be required to visit several sites over a 15-mile radius, performing routine and preventative service/maintenance on a variety of A/C equipment including chillers. .
skills You will have extensive knowledge of A/C service within a building services environment along with an industry relevant qualification, such as C&G Refrigeration & Air conditioning
- Refrigeration - Installation Engineer
- posted on 09/07/2004
location Greater London South/ West London - West Sussex Border
description Our Client is a Refrigeration Installation and Service Company. They are currently seeking an experienced Installation Engineer who will be required to install a range of commercial refrigeration equipment for the pub/licensed trade. Installs will be mostly cellar cooling equipment, but walk in fridges/freezers, ice machines, bottle coolers and beer/bottle cabinets, etc will be required too. Covering the London/South area the job is mainly installation, but will involve some service work in quie
skills 2 Years Minimum previous refrigeration - installation experience. UK Driving License. Live in the London/West Sussex regions.
- Refrigeration Service Engineer
- posted on 09/07/2004
location England South London & Essex
description Our Client is a Refrigeration Installation and Service Company with major clients within the leisure and drinks industry. They are currently seeking experienced refrigeration Service Engineers required to work on a range of commercial refrigeration equipment for the pub/licensed trade including cellar coolers, walk in fridges/freezers, ice machines, bottle coolers and beer/bottle cabinets, etc. Engineers required in the South London and Essex area, the job is mainly service/reactive repairs, but
skills Experience within the commercial refrigeration industry.
Qualifications such as C&G Refrigeration & Air Conditioning and refrigerant handling are a distinct advantage.
- Refrigeration/Air Conditioning Service Engineer
- posted on 09/07/2004
location Greater London London, Mainly south london - all work carried out
description Our Client is a building services company who specialise in the installation and maintenance of air conditioning and refrigeration units.
They currently require a Refrigeration/AC Engineer to carry out installations and maintenance on a variety of equipment such as condensing units, air handling units, splits, VRV's in locations such as pubs, government buildings and banks the work is mainly in large organisations through to domestic installs within the south London area.
skills The right candidate will be an experienced engineer who holds relevant qualifications including safe handling of refrigerants. Candidates on the skill card scheme are a benefit. Must live inside the M25 to be suitable.
Must be capable of installing
- Manufacturing Engineer - Graduate / Junior
- posted on 09/07/2004
location Leicestershire Leicestershire, UK
description Our client is a world leader in their field. Due to an expansion they are looking for a graduate or a suitable person with an production and shop floor experience looking to move into a higher position. We are seeking someone to join as soon as possible to work on a number of manufacturing production projects.
We want:-
• An engineering HNC or HND qualification
• Experience of manufacturing environments/shopfloor experience
• High level of computer literacy
• Excellent communication skills
• Confidence and self motivation
• Common sense
We offer:-
• Starting salary 16 - 18k plus overtime
• Excellent Company benefits
• Real responsibility
• Ability to make an impact
• A firm foundation for an exciting and rewarding career
They firmly believe in promoting from within and allowing you the opportunity to develop your career as far as you want to. The roles/projects will give you a broad remit, with the chance to get more involved, stretched and challenged.
skills Our client is a world leader in their field. Due to an expansion they are looking for a graduate or a suitable person with an production and shop floor experience looking to move into a higher position. We are seeking someone to join as soon as possible to work on a number of manufacturing production projects.
We want:-
• An engineering HNC or HND qualification
• Experience of manufacturing environments/shopfloor experience
• High level of computer literacy
• Excellent communication skills
• Confidence and self motivation
• Common sense
We offer:-
• Starting salary 16 - 18k plus overtime
• Excellent Company benefits
• Real responsibility
• Ability to make an impact
• A firm foundation for an exciting and rewarding career
They firmly believe in promoting from within and allowing you the opportunity to develop your career as far as you want to. The roles/projects will give you a broad remit, with the chance to get more involved, stretched and challenged.
- Refrigeration/AC Maintenance Engineer
- posted on 09/07/2004
location Greater London London/M25
description Our Client is established Refrigeration & Air Conditioning Company who install, service and maintain a wide variety of refrigeration and air conditioning in the commercial and industrial industry. They are looking for an experienced field based maintenance engineer to look after clients in the London/M25 area - typically pubs, clubs and restaurants. The ideal candidate will have a minimum of 2 - 3 years experience in a similar role, be experienced in maintaining a variety of refrigeration and ac
skills 2 - 3 Years Experience in a Refrigeration/AC maintenance role.
Full UK Driving License
- Refrigeration Engineer
- posted on 09/07/2004
location England Essex
description Our Client is a Refrigeration Installation and Service Company with major clients within the leisure and drinks industry. They are currently seeking experienced refrigeration Service Engineers required to work on a range of commercial refrigeration equipment for the pub/licensed trade including cellar coolers, walk in fridges/freezers, ice machines, bottle coolers and beer/bottle cabinets etc. Covering the Essex area the job is mainly service/reactive repairs, but will involve some maintenance w
skills Service experience within the commercial refrigeration industry.
- Project Manager - Rail / Construction / Engineerin
- posted on 09/07/2004
location Greater London London/ Italy
description International infrastructure consultancy are searching for 3 Project Managers with excellent experience of running large construction projects. Excellent experience of Project Controls, Scheduling, Engineering etc is required. This is an urgent requirement for one of the world leaders. You will be based in Italy with regular trips home or relcation for the family an option. Italian language knowledge would be a massive bonus. No salary limit for the right people. PLEASE CALL TOM NIXON @ RTC FOR
skills Project Manager, Construction, Project Controls, Scheduling, Bridges, Signalling, Engineering.
- Embedded Software Engineer
- posted on 09/07/2004
location Cambridgeshire Cambridge
description You will be required to undertake a full range of activities essential to design, build, integrate and test state of the art systems within a formal systems engineering process. Using VHDL in acquisition, signal processing in Non-Comms/ESM work predominantly for the MoD.
Ideal candidates will have-
·Minimum of two years experience in coding, implementing & verifying VHDL for Xilinx FPGAs (preferably in a signal acquisition and processing environment).· Signal processing knowledge would help -
skills Minimum of two years experience in coding, implementing & verifying VHDL for Xilinx FPGAs (preferably in a signal acquisition and processing environment).· Signal processing knowledge would help - ffts, filters, sampling theory etc·
Working knowled
- Audio Software Engineer C,C++,GUI,MFC,DSP
- posted on 09/07/2004
location Greater London Surrey,London,South East,Cambridge
description You will be involved in Maintaining knowledge of current platform specific tools, development environments, software development kits and platform capabilities necessary to implement audio in game titles.
Ideal candidates will have-
Relevant degree (2:1 or above preferred), Computer Science, Audio etc
At least 3 years experience in audio software construction.
Three years plus relevant low-level engineering
Advanced computer skills (PC and Unix) and development experience on PC, Unix and
skills Relevant degree (2:1 or above preferred), Computer Science, Audio etc
At least 3 years experience in audio software construction.
Three years plus relevant low-level engineering
Advanced computer skills (PC and Unix) and development experience o
- Graduate Software/Physicist/Maths 2.1/First Class
- posted on 09/07/2004
location England Surrey
description My client is a leader in the development of computer games for PS2 and Xbox. They currently have a vacancy for a graduate with a 2.1 or higher in Physics,Maths,Electronic Engineering,Software Engineering.
Ideal candidates will have good working knowledge of one of the following-
C,C++,GUI,MFC,Matlab,3D,2D,Animation,OpenGL,Image processing
skills C,C++,GUI,MFC,Matlab,3D,2D,Animation,OpenGL,Image processing
- Cad Technican
- posted on 09/07/2004
location England Exeter
description CAD Technican required to provide support to a growing team in Exeter. Your duties will be to design; model & produce 3D CAD detailed drawings using Autocad and ideally you will also be able to use MX/Moss. You'll be working as part of a team and will also assist others in the CAD team with design and documentation. The successful candidate will have an ONC/HNC in Civil Engineering or related qualification. You will need to have roads and highways geometry design experience, and familiarity
skills MX/Moss
Autocad
ONC/HNC in Civil Engineering
DMRB
Geometry design
- Graduate Software/Hardware- C,C++,OOD,DSP,VHDL
- posted on 09/07/2004
location Scotland Scotland,London,Hertfordshire
description My Client is involved in the development of portable instruments based on the newly emerging low power electronic components.
They currently have a vacancy for a Graduate engineer with a good degree in Electronic Engineering/Computer Science.
Ideal candidates will have experience in some of the following-
C
C++
DSP
VHDL
FPGA
Circuit Design
Firmware
DSP
skills C
C++
DSP
VHDL
FPGA
Circuit Design
Firmware
DSP
- Software Physicist C,C++
- posted on 09/07/2004
location Hertfordshire Hertfordshire,London,Surrey
description My client is a leading supplier of process control and measurement tools for the optoelectronics, wireless, and silicon semiconductor equipment industries. They have a vacancy for a software engineer who has
physics/engineering degree and at least 3-4 years industrial experience working on instrumentation based code in C/C++. They must be highly self-sufficient with good problem solving skills. The successful candidate will be part of a small software team and must be capable of working with mi
skills physics/engineering degree and at least 3-4 years industrial experience working on instrumentation based code in C/C++. They must be highly self-sufficient with good problem solving skills. The successful candidate will be part of a small software te
- Graduate Software/Physicist/Maths 2.1/First Class
- posted on 09/07/2004
location England Surrey,London
description My client is a leader in the development of computer games for PS2 and Xbox. They currently have a vacancy for a graduate with a 2.1 or higher in Physics,Maths,Electronic Engineering,Software Engineering.
Ideal candidates will have good working knowledge of one of the following-
C,C++,GUI,MFC,Matlab,3D,2D,Animation,OpenGL,Image processing
skills C,C++,GUI,MFC,Matlab,3D,2D,Animation,OpenGL,Image processing
- Graduate Software Engineer, C,++,Embedded,RTOS,Tel
- posted on 09/07/2004
location Hertfordshire Hertfordshire,London
description Working as a member of the Field Support Tools development group, you will produce quality and innovative software solutions for our range of world leading Communications test products
There will be the potential to work on some of the latest network technologies such as xDSL, ATM, I_P and VOIP etc.
SKILLS-
Degree of higher in software engineering
Experience of real-time, embedded software. ‘C’ and/or C++ programming preferably with Data/Telecoms bias
Good Java programming skills
Desi
skills Degree of higher in software engineering
Experience of real-time, embedded software. ‘C’ and/or C++ programming preferably with Data/Telecoms bias
Good Java programming skills
- Control Engineer
- posted on 09/07/2004
location Scotland Scotland
description Provide engineering leadership and support in developing new or improving existing Control Systems associated with our manufacturing process. Serve as a technical expert in field.
Ideal candidates will have
Minimum of 7 years experience in a technical position
Technical leadership.
Experience in the design and implementation of PLC and PC control systems
Previous experience in developing planned and unplanned maintenance§Previous experience in a production/manufacturing environment
Exper
skills Experience in the design and implementation of PLC and PC control systems§
Previous experience in developing planned and unplanned maintenance§Previous experience in a production/manufacturing environment
Experience of machine/system test and comm
- Validation Engineer
- posted on 09/07/2004
location Dorset Dorset
description We are looking for a Validation Engineer / Test Engineer to develop test methods in conjunction with the design team. You will also carry out verification & validation testing on prototype and pre-production medical devices and assist in the design and development process. You will need excellent electronics & electro-mechanical hands-on test skills using test equipment, be used to writing verification/validation test plans to recognised standards and be methodical in your work.
skills validation or verification
medical
electronics
electro-mechanical
- Radar Lecturer
- posted on 09/07/2004
location Berkshire Berkshire
description We are looking for an experienced Radar Engineer who is looking to get into teaching or is already involved in teaching and looking for their next career move. My client specialises in delivering training courses to Degree level to the British armed forces. You don't need to have experience, more the apptitude and ability to deliver courses in a professional way.
skills radar
lecture or teach
- Mechanical Systems Engineer
- posted on 09/07/2004
location West Sussex West Sussex
description We are looking for a Mechanical Systems Engineer to work for a leading display systems design and manufacturer. You will be required to liaise closely with customers and internal sales to generate new concepts, bespoke products to client requirements and help sales staff by generating information for pricing. You will require solid mechanical design experience preferably in the simulation/visualization market, although elements of optical & electronics design would be beneficial. Good 3D CAD
skills mechanical systems
CAD
display systems
- Snr Quality Engineer (NPI)
- posted on 09/07/2004
location England Hampshire
description We are looking for a Snr Quality Engineer to ensure quality and reliability of New products being introduced to manufacture. You will also ensure that customer & employer quality, regulatory & business management system requirements are fulfilled. You will require extensive quality experience within the aerospace market whilst working with New Products. Knowledge of aerospace quality & management system requirements is essential and ideally you will have experience of reliability and environm
skills quality
reliability
aerospace
envionmental
- Firmware Engineer
- posted on 09/07/2004
location England Hampshire
description We require a Firmware Engineer to undertake the hands-on design of embedded software/firmware for a range of communications products. You will have an understanding of the interface requirements and hardware associated with microcontrollers. The ideal candidate will have extensive experience of C programming for embedded systems, designing digital electronic circuits and work at systems level design. The ideal candidate will have some project management or planning experience.
skills firmware
design
c
- Snr NPI Manufacturing Engineer
- posted on 09/07/2004
location England Hampshire
description We are looking for a Snr Manufacturing Engineer who has extensive experience of introducing New products to manufacture within an aerospace environment. You must have detailed understanding of project planning, New Product Introduction (NPI), have excellent lean manufacturing experience and be able to manage small projects and teams. Some external liaisons and presentations to clients will also be required.
skills manufacturing
aerospace
sensor
- Technical Services Manager
- posted on 09/07/2004
location England Hampshire
description We are looking for a Technical Services Manager who is responsible for delivering testing and consultancy services to clients on a face-to-face basis to solve compliance-related problems (EMC mainly, also RF & Electronics) mainly within the cellular market. You will run the site where operations engineering staff are required by clients and may be required to work hands-on at times. This will suit a time-served EMC test engineer who has experience of working in a test-house environment, RF and
skills test
emc
manager
rf or electronics
cellular
- Mechanical Design Engineer
- posted on 09/07/2004
location England Hampshire
description We are looking for an experienced Mechanical Design Engineer with extensive knowledge of low-medium volume sheet metal enclosure design & 19" rack mount applications. An appreciation of relevant tolerance applications and Safety (BS EN 60950) & EMC directives. Proven 3D design skills will be needed to suceed in this role, ideally within an electro-mech environment. My client uses AutoCAD 2004, Mechanical Desktop 2004 & Inventor CAD systems.
skills mechanical
design
enclosures
19" rack
- Production Planner
- posted on 09/07/2004
location England Hampshire
description We are looking for a Production Planner to develop and communicate the finite scheduling of the shop floor based on customer requirements, machines & labour resources. You will provide feedbackto customer services on availability of orders and to management on adherence to plan and lead times. We are looking for someone with 5 years + experience in a similar role ideally within the FMCG or related market.
skills production
planning
fmcg or plastic
- Mechanical Designer
- posted on 09/07/2004
location Dorset Dorset
description Our client, a leading contractor to the MOD, is looking to recruit a Mechanical Design Engineer to work on the next generation of ROV's for bomb disposal purposes. You will need solid experience of designing dynamic mechanisms, electronic packaging, and motor drive systems to MOD standards coupled with an awareness of environmental and packaging requirements (including EMC). The ideal candidate will have experience of Mechanical Desktop and/or Solid Works although any CAD package will be revie
skills mechanical
design
packaging
mechanisms
motor drives
CAD
Defence
- Mechanical Design Engineer
- posted on 09/07/2004
location England Hampshire
description We are looking for a Mechanical Design Engineer who will be responsible for all aspects of bespoke filtration systems product design from taking cutomer specifications through conception to manufacture & installation. You will have a minimum 5 years experience of mechanical design including hydraulics, fluid mechanics & pressure systems ideally within an aerospace environment.
skills mechanical
filters or filtration
design
- Team Leader - Regulatory Services
- posted on 09/07/2004
location England Hampshire
description We require an experience engineer who has moved into a management orientated role for this leading position within our clients Regulatory Services dept. You will report into the Technical Services Manager looking after day-to-day issues within the department from ensuring delivery of reports to assisting sales staff. This role requires someone with extensive industry experience in terms of product approval and test experience (CE, FCC marking etc). You must also have some team leadership or b
skills regulatory
test
manager or leader
CE or FCC
approval
- Environmental Engineer
- posted on 09/07/2004
location England Hampshire
description An Environmental Engineer is needed to be responsible for Thermocouple Calibration and Temperature test laboratory areas. All work will be to UKAS standards. You will also be responsible for first-line maintenance and repair of mechanical and electrical test equipment and arranging calibration or testing with external test houses. You will have 8 years experience in a calibration environment with an emphasis on thermocouple calibration and should include temperature testing knowledge.
skills calibration
thermocouple
temperature
lab
- Engineering Manager / Director - Power I
- posted on 09/07/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description A senior technical manager / director is sought within this leading edge fabless semiconductor organisation. Our clients technology represents a breakthrough opportunity in one of the fastest growing market segments within semiconductors. The founding executives and engineering team are bright, highly qualified and motivated; the company now seeks a senior technical manager / director to lead the silicon design and power transistor / power device design activities. The successful candidate must have a technical background in power transistor / device design, as well as strong awareness of digital and analogue IC design challenges. He/she must also have experience of managing a team of engineers, and making high level decisions about IC architectures, design-ability and manufacturability. The ability to understand customer / market requirements and take responsibility for delivering the right silicon solutions is key to this role. Please contact us to discuss this role in full confidence.
skills Power, IC, semiconductor, design, manager, director, analogue, silicon, circuitry, transistors, jobs
- Air Conditioning Installation and Breakdown Engine
- posted on 09/07/2004
location West Midlands (Birmingham) Birmingham - West Midlands
description Our client is a specialist air conditioning installation and climate control company. They are currently looking for a reliable installation and breakdown engineer to carry out the installation of cassette units and splits and maintenance/breakdown repair of units such as changing pumps etc. You will be based in the West Midlands and hold a Full UK Driving Licence.
skills Installation experience and a general knowledge of AC equipment including splits and cassette units. Driving Licence required.
Qualifications are a benefit especially a safe handling certificate.
Must be a reliable person.
- Product Manager - Wireless
- posted on 09/07/2004
location Wiltshire United Kingdom, South West
description Superb opportunity to have a significant impact within a growing, dynamic telecomms organisation. Our clients products address the interoperability issues which are key to enabling seamless wireless connectivity. They have created a new role for an individual with a strong combination of technical and commercial / communication skills. Working with the sales, marketing and technical teams internally, as well as spending significant time with customers, the successful candidate will influence the technical content and direction of our clients product offering. Skills required include: ·Technical knowledge of the software that wraps around communications ICs ·Must have knowledge of WCDMA or 802.16 protocols ·Experience of other protocols (3G, EDGE, etc) very useful ·Excellent communication skills ·A “doer” who can respond quickly to customers ·A team player who can balance the issues between customers, sales, and engineering ·An organized individual who can standardize documentation ·Basestation experience preferred, however WCDMA handset experience considered. This role would suit an applications engineer or project manager with good communications skills, an existing Product Manager, or a technical marketing engineer from the wireless communications domain.
skills Product, manager, wireless, telecomms, WCDA, WLAN, 802.16, 3G, reference designs, marketing, application, engineer, wireless standards, software, base stations, semiconductor, jobs.
- Business Development Manager ( Semiconductors )
- posted on 09/07/2004
location UK Germany (Frankfurt)
description Our client, a developer of high value semiconductor equipment, is currently looking a senior Business Development Manager to work out of the Frankfurt offices.
You define the current products value proposition and product roadmap based on customer needs; identify customer needs; define the companies brand; develop customer case studies, product business cases & analysis' monitor the companies and products positioning in the marketplace.
You are degree educated ( engineering, computer science, IT, or physics )and have 3-5 years relevant working experience.
You are very customer focused and some experience in a Start up environment is a bonus ( company is a start up backed by top tier Vcs .
Working experience in the semiconductor industry is a must.
Fluency in German and English is a must.
Please forward your CV ( Word Format ) to: paulk@euro-skills.com
skills sales,business development, semiconductors,start up,engineering
- Lead Team Technician
- posted on 09/07/2004
location England London
description Our client is currently looking for a Lead Team Technician to work as part of the engineering function to action and develop maintenance practices to ensure best industry standards for reliability, wastage and cost effectiveness within the plant.
We would like to hear from applicants with Electrical/Mechanical qualifications and FMCG production line experience.
skills We would like to hear from applicants with Electrical/Mechanical qualifications and FMCG production line experience.
Multi Skilled including Mechanical & Electrical.
- Facilities Manager - Engineering
- posted on 09/07/2004
location Greater London London W1
description experienced competent designer and/or technical manager with a minimum of five years relevant experience in Facilities Management (FM)/Building Surveying or Engineering consultancy companies with a proven track record of exercising sound technical and financial management over a range of FM services within a varying property portfolio. Work experience must demonstrate a significant practical knowledge of premises management to include building fabric, engineering services and general estates iss
skills competent designer and/or technical manager
minimum of five years relevant experience in Facilities Management
(FM)/Building Surveying or Engineering consultancy companies
proven track record of exercising sound technical and financial man
- Precision Engineering Sales Executive
- posted on 08/07/2004
location West Midlands United Kingdom, Coventry
description Our client is a dynamic precision engineering company, based in Coventry. They specialise in short run, fast turnaround precision engineering in all materials. They are aerospace approved with full ISO qualifications. Their customer base encompasses aero, auto, marine, & oil. They have full CAD support and are used to picking up jobs when others have failed. Their recent investment includes 3m bed full 5 axis milling, live tool lathes, cnc VMCs. The position is a new vacancy to improve their sales coverage. They are looking for a dynamic sales person with a proven track record in engineering component sub contract sales. The ideal candidate will have the confidence and experience to sell a service and to develop customers to gain a major portion of their subcontract business. We will generally win the business on superlative service and then grow it. An engineering background will be necessary, an ability to estimate will be very desirable, a can-do mentality essential. They are particularly keen to develop the oil & gas/ medical / and packaging areas, so an existing client base/knowledge in any of these sectors would be advantageous. The candidate must be able to demonstrate proven sales track record. Ideally of graduate level, the post will attract a strong personality, engineering sales are not easy! Our client have aspirations for worldwide sourcing utilising their solid quality and UK manufacturing base, so the potential for advancement is significant. An attractive package for the successful candidate is on offer. If interested in this position, simply apply via the button shown.
skills N/A
- Service management process consultant
- posted on 08/07/2004
location Bedfordshire United Kingdom, South East
description Excellent contract opportunity for an ITIL qualified person to join this prestigious client as a service management process consultant. The contract will last approx 9 months and you will be required to work in teams of 2-3 on a project basis- updating standard processes and procedures. We require ITIL qualified candidates with at least 5 years experience in service delivery within the desktop outsourcing environment, including exposure to dealing with commercial customers. Your background should include experience/knowledge of incident management, inventory management & security;process re-engineering; writing/agreeing processes/procedures and operational service management. Candidates must have an appreciation of Management Information Reporting, ability to work in a fluid environment and experience of defining and specifying service requirements. To apply please e-mail your CV with a brief cover note.
skills ITIL, project, senior, MIS reporting,
- Systems Engineer - Rail - up to 60k
- posted on 08/07/2004
location Greater London London
description International rail company is searching for a Systems Engineer. The purpose of the Systems Engineer is to oversee, perform, evaluate or assist with the signalling system and sub-systems conceptual design, analysis, modelling and testing to specify and verify compliance with customer, technical and interface requirements. B.Sc. Electrical Engineering, Computer Science or equivalent.Knowledge of railway signalling techniques.Knowledge of signalling systems. Understanding of railway operations. Kno
skills Systems Engineer, Signalling, Rail, Engineer, Engineering
- Project Engineer - Rail - 45k plus bonus
- posted on 08/07/2004
location England Middlesex
description International Rail company are searching for an experienced Project Engineer to define, implement and complete the engineering work packages for the Communications and Control aspects of the Rail, Tunnels and Station areas within a large project. Experience / Qualifications: Five years experience of technical management of communication systems in general. Experience of managing multi-disciplinary engineering teams in a sub-contractor environment. Experience of working on railway telecoms projec
skills Project Engineer, Rail, Telecomms, Communications, Control
- Senior Service Engineer
- posted on 08/07/2004
location England East Anglia
description Our Client is a world leader in manufacturing, selling, installing and servicing merchandising equipment and refrigeration systems to customers in over 80 countries. They are currently looking for a Senior Service Engineer to work in Ipswich, who will be carrying out maintenance and reactive service of refrigeration equipment for customers. This involves visiting customer sites and diagnosing and repairing refrigeration and electrical faults. The candidate will be responsible for ensuring the en
skills The Candidate will have served a recognised apprentiship and have several years field experience with experience in a variety or refrigeration equipment. Current refrigeration handling certification and electrical qualification is desirable. The Cand
- Software Engineers - all levels
- posted on 08/07/2004
location Greater London United Kingdom, London
description Our UK based client has immediate requirements for over 30 software, DSP and test engineers, opportunities exist from junior engineer through to team lead / manager. Their software group is responsible for developing Layers 1, 2 and 3 of the Air Interface for a Dual Mode (i.e. GSM/GPRS/UMTS) 3rd Generation Mobile terminal. You will have experience of real time and/or embedded software development and strong C/C++ programming skills in a structured development environment. Experience in any of the following is desirable but not essential: Mobile Telecoms Protocols, RTOS, ARM Microprocessors, Device drivers (ISRs). Preference will be given to candidates who have experience designing and developing GSM, GPRS or UMTS systems. For their System Test engineering and team lead roles a background in system, integration or conformance testing, ideally in a communications environment with ability to code in TTCN is required. Please call IC Resources on 0208 400 2444 or email alex@ic-resources.co.uk
skills Software and system test engineers required with experience in some of the following - C / C++ / OOA / OOD / UML / TTCN / LINUX / GSM / GPRS / UMTS / 2G / 2.5G / 3G / CDMA / EDGE / RLC / MAC / GTP / RTOS / ARM / embedded / DSP / algorithm / perl / python / wireless / handsets
- Product Manager
- posted on 08/07/2004
location England Hampshire
description We are looking for a Product Manager to maximize revenue and profit through the definition, launch and commercial management of products and solutions within the Broadcast market. You will require a good level of education and ideally hold a Chartered Institute of Marketing qualification or similar. It is essential you have a good engineering/technical background who is also able to carry out business analysis and planning with up to date current market knowledge. Ideally you should also have
skills product manager
launch
commercial
broadcast
- General Manager – Operations/Workshop
- posted on 08/07/2004
location England South West, South Coast, Hampshire
description Defence orientated engineering service, repair and manufacturing organisation seek a General Manager for their Operations Division. You will be responsible for managing and motivating a team of several hundred staff in a multi-million pound sales turnover operation. You will need experience of running a successful multi-million pound repair or manufacturing workshop, managing large teams of people, as well as experience in Lean Manufacturing, Continuous Improvement and ISO standards. Skills: Ope
skills Skills: Operations Manager, Workshop Manager, General Manager, Manufacturing Manager, Lean Manufacturing, Continuous Improvement, ISO9001:2000, ISO14001:1996, Man-Management
- General Manager – Operations/Workshop
- posted on 08/07/2004
location England South West, South Coast, Hampshire
description Defence orientated engineering service, repair and manufacturing organisation seek a General Manager for their Operations Division. You will be responsible for managing and motivating a team of several hundred staff in a multi-million pound sales turnover operation. You will need experience of running a successful multi-million pound repair or manufacturing workshop, managing large teams of people, as well as experience in Lean Manufacturing, Continuous Improvement and ISO standards. Skills: Ope
skills Skills: Operations Manager, Workshop Manager, General Manager, Manufacturing Manager, Lean Manufacturing, Continuous Improvement, ISO9001:2000, ISO14001:1996, Man-Management
|
