Click here to visit
our list of resources!
UK Accounting Jobs
Childcare Jobs
Engineering Jobs
|
 |
|
|
Searched in jobs for keywords electronics and and and design
Results are ordered by date. Older jobs are included as that agency may have other jobs that fit the search: electronics and design.
Click the job you want more information on:
- Graduate Software/Hardware- C,C++,OOD,DSP,VHDL
- posted on 29/09/2004
location Hertfordshire Scotland,London,Hertfordshire
description My Client is involved in the development of portable instruments based on the newly emerging low power electronic components.
They currently have a vacancy for a Graduate engineer with a good degree in Electronic Engineering/Computer Science.
Ideal candidates will have experience in some of the following-
C
C++
DSP
VHDL
FPGA
Circuit Design
Firmware
DSP
skills C
C++
DSP
VHDL
FPGA
Circuit Design
Firmware
DSP
- Software/Hardware Engineer, C,Analogue,Digital
- posted on 29/09/2004
location England Hampshire
description Working in a multi-disciplinary team providing the hardware/software resource for new product development and existing product improvements. Your first project will be the development of the drive electronics and control system/software
Skills
4+ years' experience as software/electronics design engineer working within an industrial product development team; ·
Highly proficient in embedded design using "C" software; ·
Strong working knowledge of the following microprocessors: 8051 and ARM7
skills 4+ years' experience as software/electronics design engineer working within an industrial product development team; ·
Highly proficient in embedded design using "C" software; ·
Strong working knowledge of the following microprocessors: 8051 and AR
- Software Engineer- C,C++,Telecoms
- posted on 29/09/2004
location England Surrey,Berks,London
description My client is a leader in the design and development of Satelite communication systems. The are looking to recruit an experienced Software Developer/Project Manager to work in a communications R&D environment. We seek good overall software development and engineering skills coupled with proven project management abilities. Ideal candidates will have strong C Programming and an in-depth knowledge of communications systems and software. It is desirable to have knowledge of TCP/IP and programming
skills strong C Programming and an in-depth knowledge of communications systems and software. It is desirable to have knowledge of TCP/IP and programming for embedded systems, including embedded
Linux.
- Software Engineer/Electronics C,C++,Firmware,Medic
- posted on 29/09/2004
location Warwickshire Warwickshire,Midlands
description My client is involved in providing creative and practical design solutions, on time and to budget. They work with the latest technologies, materials and processes in a broad range of business sectors for both home and global markets.
They currently have a vacancy for a design engineer with good working knowledge of C,C++ and Electronics (DSP)
Ideal candidates will have a background in developing medical products.
skills C,C++,DSP,Electronics,Medical
- Software Team Lead - QA
- posted on 29/09/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description This is an opportunity to join an exciting start-up in the EDA field with groundbreaking technology for processor design. As QA lead you will be driving the testing and quality strategy for innovative new EDA tools. Your knowledge of ASIC design verification combined with your experience in software QA will help produce both high levels of software quality and high QoR on the netlists produced by their tools. You will need to work closely with the software development team understanding new features and devising strategies to test the efficacy of new algorithms on customer circuits, and with the Applications Engineering team to ensure that the products will meet customer needs. You will not be afraid to get your hands dirty initially, but you will also have the management skills to build up a team of highly motivated professionals around you as the company expands. Qualifications: - Strong degree level qualification - Over 5 years experience in Software QA, preferably in the EDA space - Strong knowledge of ASIC design verification - Strong intellectual capability - Qualified to work in UK In exchange for your input and hard work, expect excellent salaries and a very generous share scheme.
skills Software, team lead, software test, QA, QoR, EDA , C, C++, java, jobs, test, quality, tools, ASIC, verification
- Physics,Maths Programmers
- posted on 29/09/2004
location Greater London London,Surrey,Cambridge
description My Clients are leaders in developing software and Mathematical models for a variety of industries including Audio,Games,Defence and Multimedia. They are currently recruiting Engineers/Scientists with good degrees 2.1+ and excellent A level/S level grades.
You will be involved in product development and research.
Working experience of any of the following will be advantageous.
C,C++,Java,GUI,OOD,OpenGL,DirectX,Embedded,Hardware,3D Graphics,Analogue,Digital design
skills C,C++,Java,GUI,OOD,OpenGL,DirectX,Embedded,Hardware,3D Graphics,Analogue,Digital design
- Senior Electrical Engineer
- posted on 29/09/2004
location Greater London London
description Our client requires a Senior Electrical Engineer, due to an expanding customer base. Candidates should be chartered (or near-chartered), have a degree/HND or equivalent qualification, and a minimum of 5 years experience in Electrical Building Services Design. Excellent communication skills, strong leadership skills and an ability to gain credibility across all levels of the business are essential. Knowledge of AutoCAD would be an advantage.
The ideal candidate would have experience on working
skills Our client requires a Senior Electrical Engineer, due to an expanding customer base. Candidates should be chartered (or near-chartered), have a degree/HND or equivalent qualification, and a minimum of 5 years experience in Electrical Building Service
- Graduate Software Engineer, C,++,Embedded,RTOS,Tel
- posted on 29/09/2004
location Berkshire Berkshire, Surrey ,London
description My client is a leader in developing of 3G handsets.
You will be involved in the involved in the complete lifecycle of the product development starting with requirements capture and analysis through to design and verification. Ideal candidates will have the following-
Experience/knowledge in most of the following:
C/C++
Java
Structured design techniques particularly UML
Working as part of a larger project team
SW development for embedded products
S/W development lifecycle
Desirable Exper
skills C/C++
Java
Structured design techniques particularly UML
Working as part of a larger project team
SW development for embedded products
S/W development lifecycle
Desirable Experience
Other programming languages, configuration management, makefi
- Senior EDA Software Engineers
- posted on 29/09/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description This is one opportunity you really cant ignore. Let us put you in touch with this exciting start-up. An innovative, exciting EDA company with ground-breaking technology for low power chip design. Having secured funding they are beginning to look for bright, motivated software engineers to ensure they reach their ambitious but very realistic goals. You will have at least 1 years experience of large scale software development. Good knowledge of C++, STL or Java. This must be combined with an understanding of digital logic design within ASIC flows. More experienced applicants must have experience of managing a software team or significant technical ability in the EDA/low power space. In exchange for your input and hard work, expect excellent salaries and a very generous share scheme.
skills EDA, C, C++, java, software, ASIC, perl, parser, GUI, PhD, MSc, 1st Class Degree
- Embedded Hardware/Software Design
- posted on 28/09/2004
location England Hants, Hampshire, South East, England, UK
description Delivering state-of-the-art products to a wide variety of industries, this company is seeking an Embedded Hardware and Software design with excellent experience of high speed processing, analogue design, microprocessors, embedded design using "C" software and, ideally, some knowledge of control systems development.
skills Embedded Hardware/Software, C, microprocessors
- Power Supply Design Engineer
- posted on 28/09/2004
location Isle of Wight Isle of Wight, South East, UK
description With a desirable reputation for developing some of the world’s most advanced Power Supplies, our client is seeking a talented Engineer specialising in switch mode power converter design with experience of SMPS’s, EMI filter design and Forward, Flyback, Bridge and Boost topologies.
skills Power Supply Design, SMPS
- Hardware Design Engineer
- posted on 28/09/2004
location North Yorkshire York, Yorkshire, North East, England, UK
description One of the worlds leading providers of networking solutions are seeking a motivated, hands-on Engineer, qualified to HND or above with at least 2 years experience of some of the following:
„X High Speed Digital Design
„X Board Level Design
„X Design for Manufacture
„X FPGA Design
„X Optical System Design
„X Low Power Analogue Design
„X System Level Design.
skills Digital, Analogue, Optical, FPGA
- Innovative Design Engineers
- posted on 28/09/2004
location Cambridgeshire Cambridge, Cambridgeshire, East Anglia, England, U
description A company involved in the development of technology based solutions for a wide range of clients are seeking Engineers with at least a 2.1 Degree and a passion for engineering science and its application! Experience will include analogue and digital electronics, microcontrollers, PCB design, mechanical design and DSP. Recent Graduates will be considered.
skills Analogue, Digital, Microcontrollers, PCB, DSP
- “High-Speed” Hardware
- posted on 28/09/2004
location Hertfordshire Herts, Hertfordshire, South East, England, UK
description This company involved in the design and development of optical comms devices seek a Hardware Design Engineer with excellent experience of high-speed design.
skills Optical Comms devices, Photonics
- Senior Software Engineers x 4
- posted on 28/09/2004
location Wiltshire United Kingdom, Bristol
description Our client design and develop complete system-on-a-chip (SoC) solutions. Their diverse product portfolio addresses every major broadband communications market and includes solutions for digital cable and satellite set-top boxes; high definition television (HDTV); cable and DSL modems. They are setting up a new UK based software engineering team working on STB applications, in the first instance they need an experienced software manager and 4 software engineers. For the engineering posts it is expected applicants will have between 3-10 years experience. Must have working knowledge of C or C++ in a real time embedded processor environment. Working knowledge of the MIPS processor and assembly language is a plus. Must have experience working with Linux or another real-time operating system. Must have experience with MPEG2 HD/SD, NTSC, and PAL video/audio. Should have experience with SetTop box applications, middleware, and driver software design. They have some flexibility in terms of geographic location of this team; it is expected to be either Bristol or Cambridge.
skills software, embedded, processor, MIPS, STB, set-top-box, MPEG, NTSC, PAL, video, audio, RTOS, multimedia
- Software Engineering Manager
- posted on 28/09/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description Our client design and develop complete system-on-a-chip (SoC) solutions. Their diverse product portfolio addresses every major broadband communications market and includes solutions for digital cable and satellite set-top boxes; high definition television (HDTV); cable and DSL modems. They are setting up a new Uk based software engineering team working on STB applications, this is a new project and will offer someone a tremendous opportunity in terms of both technical and management responsibility. In the first instance they are looking for a Software Manager and 4 software engineers. The software manager will have at least 10 years of design experience with increasing responsibility and management experience. Must have experience managing software development in a distributed design environment. Must have working knowledge of C or C++ in a real time embedded processor environment. Working knowledge of the MIPS processor and assembly language is a plus. Must have experience working with Linux or another real-time operating system. Must have experience with MPEG2 HD/SD, NTSC, and PAL video/audio. Should have experience with SetTop box applications, middleware, and driver software design. They have some flexibility in terms of geographic location of this team; it is expected to be either Bristol or Cambridge.
skills manager, software, embedded, processor, MIPS, STB, set-top-box, MPEG, NTSC, PAL, video, audio, RTOS, multimedia
- Software Engineering Manager
- posted on 28/09/2004
location Wiltshire United Kingdom, South West
description Our client design and develop complete system-on-a-chip (SoC) solutions. Their diverse product portfolio addresses every major broadband communications market and includes solutions for digital cable and satellite set-top boxes; high definition television (HDTV); cable and DSL modems. They are setting up a new Uk based software engineering team working on STB applications, this is a new project and will offer someone a tremendous opportunity in terms of both technical and management responsibility. In the first instance they are looking for a Software Manager and 4 software engineers. The software manager will have at least 10 years of design experience with increasing responsibility and management experience. Must have experience managing software development in a distributed design environment. Must have working knowledge of C or C++ in a real time embedded processor environment. Working knowledge of the MIPS processor and assembly language is a plus. Must have experience working with Linux or another real-time operating system. Must have experience with MPEG2 HD/SD, NTSC, and PAL video/audio. Should have experience with SetTop box applications, middleware, and driver software design. They have some flexibility in terms of geographic location of this team; it is expected to be either Bristol or Cambridge.
skills manager, software, embedded, processor, MIPS, STB, set-top-box, MPEG, NTSC, PAL, video, audio, RTOS, multimedia
- Mechanical Engineer Optical,ProE
- posted on 28/09/2004
location England Hampshire
description Working as the mechanical system design engineer for new product development and existing product improvements for fiber laser products you will be the mechanical design authority within a project team. You will be responsible for all aspects of mechanical system design, including the integration of optical, thermal and electronic/ electrical system requirements, from design through to manufacture.
Ideal candidates will have-
4+ years experience as mechanical design engineer working within
skills 4+ years experience as mechanical design engineer working within an industrial product development team, ideally within the electronics/ optoelectronics industryPrevious experience of Pro Engineer.Fully conversant with DFM techniques for sheet metal,
- Development Manager
- posted on 28/09/2004
location England Hampshire
description This is a Senior Technical Management position that will include the full management of 6 development staff within a small company and the management of multiple development projects. This role would suit a Technical manager who has excellent man management skills and excellent project management skills and has recently been working on either software or hardware or firmware development projects and is of a technical background.
skills Hardware, Software or Firmware background
project management
man management
product development
design for manufacture knowledge
- Senior Electronics / Embedded Software Engineers
- posted on 27/09/2004
location Cambridgeshire
description Senior Electronics / Embedded Software Engineers
Cambs
£30k-£45k
You should have a minimum of 5 years in a product development or intellectual property development environment, preferably in telecommunications or wireless communications. You must be capable of interacting on a business development level as well as technically.
Essential skills:
· Thorough knowledge of embedded C /C++
· Understanding of real-time and hardware issues
· Hardware/software system level design
· Familiarity with assembler coding
· Understanding of electronic hardware and systems - especially processors.
· Proven project management capabilities are expected from more senior candidates.
You should be:
· A first-class technical software engineer.
· Able to use initiative and take responsibility. To work with minimal supervision.
· Creative but accurate and self-critical.
· Good communicator - both within teams and with clients.
· Practical, hands-on and enthusiastic team player.
· Can work to deadlines under pressure.
You should have:
· 1st or 2.1 honours degree from a good engineering university.
· Track record of successful product development through to production.
Depending on your skills and experience you will deliver product development assignments including system architecture, hands-on development, team leading, multi-discipline project leading, and software process development, also representing the company to blue-chip clients.
For the more senior role you should have thorough knowledge and recent experience of embedded systems - system architecture, hardware interfaces, embedded C and C++, RTOS, Communications protocols. This experience should include some of VxWorks, Linux, CE, Symbian, UML, TCP/IP. You should be a commercially aware, committed, first-class technical software professional willing to take responsibility and work within budgets and deadlines.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com.
For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
- Senior Mechanical Design Engineer
- posted on 27/09/2004
location Wales
description Senior Mechanical Design Engineer
Mid Wales
Up to £32k
My client is a world leader in the design, production and marketing of electronic drives for the control of electric motors.
They are currently looking to recruit a degree educated Engineer with good working knowledge in 3D CAD from an electronics environment.
The role will involve technical responsibility for sections of projects from initial concept to production and the conversion of concept into detailed, producible parts.
You must be proficient in the use of Pro/ENGINEER for detailed 3D Modelling of complex aluminium diecastings and injection-moulded plastic parts.
Other areas of interest will include thermal management knowledge and experience designing aluminium extrusions, PCB assemblies, cables, harnesses or connectors.
skills
- Software Engineer- C,C++,TCP/IP,RTOS
- posted on 24/09/2004
location England Cambridge
description A Low Level Software Engineer is required for our Application Software team. Applicants must be suitably qualified to at least degree level and have a minimum of 2 years' experience working in a structured development environment. C/C++ is essential, as is experience of fault-finding at both software and electronics levels. In addition, applicants should be able to demonstrate a working knowledge of embedded operating system design, Object Oriented design methodologies, and Linux. An understandi
skills C,C++,TCP/IP,RTOS
- Software Engineer C,C++,Embedded,Video
- posted on 24/09/2004
location Scotland Scotland
description An experienced developer with strong Object Oriented Design skills is required for our Application software team. Applicants must be suitably qualified to at least degree level and possess a minimum of 2 years' experience working in a structured development environment. Candidates must be able to demonstrate a sound working knowledge of Object Oriented Design using UML, together with programming experience in C++, C# or Java. Experience of XML, OO framework design as opposed to framework use, UP
skills C++, C# or Java. Experience of XML, OO framework
- Software Engineer,Control,Robotics
- posted on 24/09/2004
location Kent Kent
description My client designs and manufactures special purpose machinery, supplying equipment to the Automotive, Hydraulic, Oil and gas, and the paper making industrial sectors.
The successful candidate will be involved in the construction of new machine control programs using Microsoft C++ and Visual basic, plus administering existing code. The role will involve liaising with machine mechanical and electrical design engineers and customers producing software specifications and programs. Loading softwar
skills Programming skills in Microsoft software C++ and Visual Basic.
Basic knowledge of machine control systems.
PLC programming knowledge
Understanding of electrical control diagrams and systems
Understanding of PC hardware.
PC Network setup and admi
- Software Engineer-Test,C++,Telecoms
- posted on 24/09/2004
location Buckinghamshire Buckinghamshire, Hertfordshire
description To work as part of a team creating the software to develop a range of handheld test products and features for a world telecommunications market. ideal candidates will have
2 years relevant experience of Design, Development, Test and Documentation of real-time, embedded software.
'C' and ‘C++’ Programming with Data/Telecomms experience.
Desirable:
4 years relevant experience of Design, Development, Test and Documentation of real-time software for embedded and Windows/Windows CE/Pocket PC e
skills 2 years relevant experience of Design, Development, Test and Documentation of real-time, embedded software.
'C' and ‘C++’ Programming with Data/Telecomms experience.
- Hardware Systems Engineer
- posted on 24/09/2004
location Kent Kent, South East, England, UK
description A company involved in the design and manufacture of state-of-the-art special purpose machinery are seeking a self motivated individual with experience of programming machinery such as assembly systems (PLC's), robotics, test machinery and special purpose machinery. You with preferably have experience in Visual Basic, C/C++, SCADA, PLC's, PC's, HMI's, robotics and vision systems, the design of control systems and writing the software for an array of projects.
skills PLC/SCADA, Visual Basic, C/C++, HMI's, robotics, vision systems
- Senior Electronics Engineer - to £50k
- posted on 24/09/2004
location West Sussex West Sussex, South East, England, UK
description This is an outstanding opportunity for an equally outstanding individual to fill a crucial role within one of the UK’s most innovative instrumentation companies. They are seeking a Senior Electronics Engineer with at least 5 years experience of electronics design, which will include knowledge of the following: high power distribution systems, high power switch-mode PSUs, medium power RF generators, control systems, including generalised I/O and hardware/software interfacing, PLCs, industrial PC
skills Electronics Design, Power Supply, Lasers
- Senior Electronics Design Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridge
description An advanced technology company, with a history of launching first to market products, seeks an experienced Electronic Engineer to be involved in the development of a wide variety of scientific instruments and associated systems.
skills Scientific instrumentation, electronics design, DFM, EMC
- Mechanical Design Engineer
- posted on 24/09/2004
location England Hampshire
description We are looking for an experienced, well qualified Mechanical Design Engineer to work as part of a Project team on both new product development and existing product improvement. You will be the mechanical Design Authority in the project team. You will have excellent Pro-Engineer knowledge and experience of working in a multi-discipline team within the electronics/optoelectronics market. You knowledge of DFM techniques for sheet metal, machining and plastic injection while having an appreciatio
skills pro-e
mechanical
design
- Mechanical Design Engineer
- posted on 24/09/2004
location England Hampshire, Surrey, Berkshire
description Our client are a leading manufacturer of electro/mechanical equipment. Due to continued growth they are currently recruiting for an experienced Mechanical Design/ Development Engineer. This role would ideally suit a graduate with 3 years minimum commercial experience however we will consider more experienced professionals. Candidates must have experience of 3d Modelling Software Solidworks, sheet metal design and the manufacture of an electro/mechanical product.
skills .
- PCB Design Engineer
- posted on 24/09/2004
location England Hampshire, Surrey, Berkshire
description Working for a leading design and manufacturer of electro/mechanical products you will be fully responsible for the design and development of PCB's used within the company's products. You will initially be responsible for setting up new PCB design software workstation using Orcad V10. You will also design and maintain a wide range of PCB's and work closely with production engineers to create test procedures and test fixtures. You should be qualified to HNC in a relevant engineering discipline wit
skills .
- Electronics Engineer
- posted on 24/09/2004
location Gloucestershire Gloucestershire
description Our client has an opening for an Electrical Engineer to support the engineering development and testing of electronics products for Ultronics. In this role, the successful candidate will perform electronic circuit design, support calculations and analysis, printed circuit board modifications and layout for EMC considerations, plan and conduct product testing, evaluation, and qualification. Candidates will perform support activities such as design reviews and Failure Mode Effects Analysis (FMEA)
skills .
- Senior optical systems engineer
- posted on 24/09/2004
location Kent Kent, UK
description Senior optical systems engineer to work on instrumentation design, encompassing all phases of the evolution of optical instrumentation development including presentations to customers, seeking business opportunities, review and refinement of customer requirements, proposal preparation including costs and schedules, detailed design using CAD tools and preparation of system and subsystem specifications, practical system integration and testing and project management. You will liaise with specialists from other disciplines inc. electronics, software, structural, thermal, and mechanical. You must have 5 years experience in design of optical systems, with a bias towards imaging systems, an ability to derive, analyse and optimise optical systems at conceptual and detailed design level, project management experience, a good degree in Physics and IT skills. Salary based on qualifications and experience. Benefits: private medical insurance, company pension and 23 rising to 28 days holiday.
skills Senior optical systems engineer to work on instrumentation design, encompassing all phases of the evolution of optical instrumentation development including presentations to customers, seeking business opportunities, review and refinement of customer requirements, proposal preparation including costs and schedules, detailed design using CAD tools and preparation of system and subsystem specifications, practical system integration and testing and project management. You will liaise with specialists from other disciplines inc. electronics, software, structural, thermal, and mechanical. You must have 5 years experience in design of optical systems, with a bias towards imaging systems, an ability to derive, analyse and optimise optical systems at conceptual and detailed design level, project management experience, a good degree in Physics and IT skills. Salary based on qualifications and experience. Benefits: private medical insurance, company pension and 23 rising to 28 days holiday.
- Electronics Product Support Engineer
- posted on 24/09/2004
location Wiltshire Wiltshire, UK
description Electronics Product Support Engineer to produce designs and test specifications for new products, answer production design and process queries, produce component specifications, component selection for obsolete parts, investigation tests into design problems, re-engineer for component obsolescence and reliability improvements, investigation of site returns and reports to customers, investigate on site system/product problems, analyse failure trends and advise action. You must be qualified to HNC / HND Electronics, have 5 years experience of design / development of analogue / digital circuits, analytical skills to find faults and problem solve, manual dexterity to work with surface mount components. be willing to work overtime and be goal driven. Permanent iro GBP25k
skills Electronics Product Support Engineer to produce designs and test specifications for new products, answer production design and process queries, produce component specifications, component selection for obsolete parts, investigation tests into design problems, re-engineer for component obsolescence and reliability improvements, investigation of site returns and reports to customers, investigate on site system/product problems, analyse failure trends and advise action. You must be qualified to HNC / HND Electronics, have 5 years experience of design / development of analogue / digital circuits, analytical skills to find faults and problem solve, manual dexterity to work with surface mount components. be willing to work overtime and be goal driven. Permanent iro GBP25k
- Safety Engineer
- posted on 24/09/2004
location Wiltshire Wiltshire, UK
description Safety Engineer to produce compliance with safety assurance plan by assisting planning activities, conduct project audits / reviews, provide provision of safety assurance evidence, perform hazard identification / analysis, causes and level of risk, specify safety requirements to reduce risk to acceptable level, work with design engineers to develop robust safety architectures to meet required safety requirements (DFMEA, Functional Failure Analysis and Reliability Block Diagrams), review and analyse design using Static Analysis, Fault Trees (FMEA) from system to component level to validate that design meets required safety requirements and standards. You must have good working background of component level electronics / mechanical, understand from a systems and detailed component viewpoint. Knowledge of real time software advantageous. Qualified to HNC or better with 5 years in rail or transportation sector. Permanent role to GBP30k.
skills Safety Engineer to produce compliance with safety assurance plan by assisting planning activities, conduct project audits / reviews, provide provision of safety assurance evidence, perform hazard identification / analysis, causes and level of risk, specify safety requirements to reduce risk to acceptable level, work with design engineers to develop robust safety architectures to meet required safety requirements (DFMEA, Functional Failure Analysis and Reliability Block Diagrams), review and analyse design using Static Analysis, Fault Trees (FMEA) from system to component level to validate that design meets required safety requirements and standards. You must have good working background of component level electronics / mechanical, understand from a systems and detailed component viewpoint. Knowledge of real time software advantageous. Qualified to HNC or better with 5 years in rail or transportation sector. Permanent role to GBP30k.
- IC Designer - Analogue / Mixed Signal
- posted on 24/09/2004
location South Yorkshire South Yorkshire, UK
description IC Designer with 2 years relevant experience of design using either CMOS or bipolar technologies to produce mixed signal or analogue ICs with circuit design at transistor and cell level and using Cadence, ADS or Mentor analogue IC design software. Applicants must have in-depth knowledge of at least one of the following: analogue layout, CAD support, I/O cell design, low power / low voltage, RF, data conversion, system design or analogue HDL. A background in either data or mobile communications advantageous as is ability to demonstrate strong theoretical and practical skills and self motivation and ability to work independently. This is a permanent position paying according to ability.
skills IC Designer with 2 years relevant experience of design using either CMOS or bipolar technologies to produce mixed signal or analogue ICs with circuit design at transistor and cell level and using Cadence, ADS or Mentor analogue IC design software. Applicants must have in-depth knowledge of at least one of the following: analogue layout, CAD support, I/O cell design, low power / low voltage, RF, data conversion, system design or analogue HDL. A background in either data or mobile communications advantageous as is ability to demonstrate strong theoretical and practical skills and self motivation and ability to work independently. This is a permanent position paying according to ability.
- Senior Electronics Engineer - Data Acquisition
- posted on 24/09/2004
location Cardiff Cardiff, UK
description Senior Electronics Engineer for permanent role in South Wales for data acquisition company. GBP28k - GBP40k and degree qualified, your duties will include system design and preparation of proposals, plan and manage development, spec, design and develop hardware, lead projects and contribute to quality improvement and process development. You must have several years’ electronic design experience with responsibility for part of a larger project, medium speed / high resolution data acquisition, high speed micros / DSPs, standard interfacing ICs; RS232 drivers, ADCs, DACs, I2C, etc, battery powered equipment design, inc. battery chargers, switch mode power supplies, low level analogue design; interfacing circuitry, signal filter design; piezoelectrics, accelerometers, transducers, EMC, ESD, LVD approvals, CAD (Protel preferred), layout of multi-layer high speed digital PCBs, RF appreciation, surface mount soldering of prototypes, prototype test and validation, design documentation, etc.
skills Senior Electronics Engineer for permanent role in South Wales for data acquisition company. GBP28k - GBP40k and degree qualified, your duties will include system design and preparation of proposals, plan and manage development, spec, design and develop hardware, lead projects and contribute to quality improvement and process development. You must have several years’ electronic design experience with responsibility for part of a larger project, medium speed / high resolution data acquisition, high speed micros / DSPs, standard interfacing ICs; RS232 drivers, ADCs, DACs, I2C, etc, battery powered equipment design, inc. battery chargers, switch mode power supplies, low level analogue design; interfacing circuitry, signal filter design; piezoelectrics, accelerometers, transducers, EMC, ESD, LVD approvals, CAD (Protel preferred), layout of multi-layer high speed digital PCBs, RF appreciation, surface mount soldering of prototypes, prototype test and validation, design documentation, etc.
- Embedded Software Engineer
- posted on 24/09/2004
location West Sussex West Sussex, UK
description Embedded Software Engineer to design PC and embedded software for electronic instrumentation, liasing with hardware design engineers to ensure the most effective implementation. You must be proficient at C, C and familiar with some of: Java, TCL/TK, Ruby and SQL for support on existing products. Knowledge of Unix / Linux and Unix VME platform advantageous as is Windows. Experience of source control - RCS, CVS useful as is embedded development environments (8051, 56000, Ubicom). Familiarity of TCP/IP and SCPI protocols, knowledge of GUI design, experience of windowing toolkits useful. You should be Degree qualified and must have relevant experience to do the job! For the right applicant, this role will progress to project leader status. This is a permanent position. Salary iro GBP30k.
skills Embedded Software Engineer to design PC and embedded software for electronic instrumentation, liasing with hardware design engineers to ensure the most effective implementation. You must be proficient at C, C and familiar with some of: Java, TCL/TK, Ruby and SQL for support on existing products. Knowledge of Unix / Linux and Unix VME platform advantageous as is Windows. Experience of source control - RCS, CVS useful as is embedded development environments (8051, 56000, Ubicom). Familiarity of TCP/IP and SCPI protocols, knowledge of GUI design, experience of windowing toolkits useful. You should be Degree qualified and must have relevant experience to do the job! For the right applicant, this role will progress to project leader status. This is a permanent position. Salary iro GBP30k.
- Electronics Engineer - Motion Control
- posted on 24/09/2004
location Essex Essex, UK
description Electronics Engineer - Technically skilled engineer to design motion control systems using digital and analogue discrete boards. Design of custom control PCBs using analogue and digital cicuitry controlled by microcontrollers (PIC). A team player to be involved in the full product life cycle handling and an ability to organise product testing to current standards. Able to use initiative, take responsibility and must be a good communicator. HND/BSc qualified with previous knowledge of and hands-on experience of motion control an advantage. This is a permenant position and salaries are according to experience.
skills Electronics Engineer - Technically skilled engineer to design motion control systems using digital and analogue discrete boards. Design of custom control PCBs using analogue and digital cicuitry controlled by microcontrollers (PIC). A team player to be involved in the full product life cycle handling and an ability to organise product testing to current standards. Able to use initiative, take responsibility and must be a good communicator. HND/BSc qualified with previous knowledge of and hands-on experience of motion control an advantage. This is a permenant position and salaries are according to experience.
- Digital Design Engineer.
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Digital Design Engineer. You will be involved in designing and verifying digital circuits which form part of mixed mode ASICs used in wireless communications systems. You will be responsible for designing digital hardware for use in wireless communications ASICs, and for verifying the designs through simulation and emulation. The digital hardware may, for example, be related to signal processing associated with modulation and demodulation, host interfaces such as USB and PCI, and hardware accelerators used for encryption and other intensive tasks. You will have 2 years of relevant experience, be thoroughly familiar with Verilog or VHDL and with programming in 'C'. You should also be familiar with synthesis and static timing analysis. Experience of implementing digital signal processing algorithms in digital hardware would be an advantage. You should have a minimum of a good honours degree from a leading institution.
skills Digital Design Engineer. You will be involved in designing and verifying digital circuits which form part of mixed mode ASICs used in wireless communications systems. You will be responsible for designing digital hardware for use in wireless communications ASICs, and for verifying the designs through simulation and emulation. The digital hardware may, for example, be related to signal processing associated with modulation and demodulation, host interfaces such as USB and PCI, and hardware accelerators used for encryption and other intensive tasks. You will have 2 years of relevant experience, be thoroughly familiar with Verilog or VHDL and with programming in 'C'. You should also be familiar with synthesis and static timing analysis. Experience of implementing digital signal processing algorithms in digital hardware would be an advantage. You should have a minimum of a good honours degree from a leading institution.
- Digital Systems Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description To help develop Digital Signal Processing algorithms which form part of mixed mode ASICs in wireless communications systems. These algorithms will be concerned with modulation, demodulation, error correction and channel equalization. The role involves implementing the algorithms in RTL for incorporation into an ASIC. The simulation of wireless communications systems to establish and optimize their performance, including modelling channel behaviour and the imperfections in the analogue and digital implementations. You will have 2 years of experience in the area of Digital Signal processing algorithm design, preferably concerned with radio communication systems. This experience may have been gained either while working in industry or through PhD level research. RTL design experience is an advantage but not a prerequisite for this role. The applicant should have a minimum of a good honours degree from a leading institution. Preferably, the applicant should have a relevant MSc or PhD.
skills To help develop Digital Signal Processing algorithms which form part of mixed mode ASICs in wireless communications systems. These algorithms will be concerned with modulation, demodulation, error correction and channel equalization. The role involves implementing the algorithms in RTL for incorporation into an ASIC. The simulation of wireless communications systems to establish and optimize their performance, including modelling channel behaviour and the imperfections in the analogue and digital implementations. You will have 2 years of experience in the area of Digital Signal processing algorithm design, preferably concerned with radio communication systems. This experience may have been gained either while working in industry or through PhD level research. RTL design experience is an advantage but not a prerequisite for this role. The applicant should have a minimum of a good honours degree from a leading institution. Preferably, the applicant should have a relevant MSc or PhD.
- Senior Product Development Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Senior Product Development Engineer to manage projects for clients in medical devices industry, (surgical and medical), drug delivery / disposable devices, etc. Develop new / existing clients and identify new opportunities. Manage development projects, create / develop new services to support development activities, support sales meetings with clients, plan and estimate product design and development, prepare project proposals. Interact with teams inc mechanical engineering, product design, software, electronics, informatics, regulatory affairs, life sciences, manufacture and process automation. Must have a good degree in mechanical engineering combined with product design, 5 years industrial experience working in product design and development for a medical products company, design for high volume manufacture, experience in multi-disciplinary projects (software, electronics, mechanics, chemistry) and working knowledge and experience of the regulatory environment in the EU and USA.
skills Senior Product Development Engineer to manage projects for clients in medical devices industry, (surgical and medical), drug delivery / disposable devices, etc. Develop new / existing clients and identify new opportunities. Manage development projects, create / develop new services to support development activities, support sales meetings with clients, plan and estimate product design and development, prepare project proposals. Interact with teams inc mechanical engineering, product design, software, electronics, informatics, regulatory affairs, life sciences, manufacture and process automation. Must have a good degree in mechanical engineering combined with product design, 5 years industrial experience working in product design and development for a medical products company, design for high volume manufacture, experience in multi-disciplinary projects (software, electronics, mechanics, chemistry) and working knowledge and experience of the regulatory environment in the EU and USA.
- RF IC Designer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description RF IC Designer with 4 years post grad exp to design complex analogue radio integrated circuits on CMOS and BiCMOS processes for Wireless applications (DECT and Bluetooth) relating to telecom, healthcare, consumer goods and automotive areas inc cellular radio telemetry system for real-time medical monitoring, digital radio link for professional intercom system, cordless video-telephone system, and wireless elevator call button. You will develop specifications and architectures for radio integrated circuits taking the wider view of the product and application requirements, design advanced radio ICs and constituent cells on CMOS and BiCMOS processes, supervise the layout and back-end processes for complete radio ICs. You must have experience of CMOS and BiCMOS RF circuit design, good knowledge of RF and IC CAD tools and good knowledge of Synthesiser and PLL design, ADC design, LNA design, ability to work with digital signal processing and modem designers.
skills RF IC Designer with 4 years post grad exp to design complex analogue radio integrated circuits on CMOS and BiCMOS processes for Wireless applications (DECT and Bluetooth) relating to telecom, healthcare, consumer goods and automotive areas inc cellular radio telemetry system for real-time medical monitoring, digital radio link for professional intercom system, cordless video-telephone system, and wireless elevator call button. You will develop specifications and architectures for radio integrated circuits taking the wider view of the product and application requirements, design advanced radio ICs and constituent cells on CMOS and BiCMOS processes, supervise the layout and back-end processes for complete radio ICs. You must have experience of CMOS and BiCMOS RF circuit design, good knowledge of RF and IC CAD tools and good knowledge of Synthesiser and PLL design, ADC design, LNA design, ability to work with digital signal processing and modem designers.
- DSP Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description DSP Engineer with 2 years post grad experience to create DSP solutions for wireless projects, from preparing specs and designing architecture to detailed design, test, documentation and maintenance, and eventual hand-over of the full design to the client. The client applies signal-processing techniques to telecom, healthcare and consumer goods. Their expertise ranges from complex software solutions in off-the-shelf DSP chips through to DSP ASIC / FPGA cores and pure hardware implementations including cellular radio telemetry system for real-time medical monitoring, software radio ASIC for a consumer application, a cordless video-telephone system, and a sensored AC motor controller for an industrial application. You will undertake detailed design of software and hardware DSP systems, write models and simulations of processing functions. You must have a good degree in maths or engineering, solid grasp of radio comms theory, fluent programming in C or Matlab and excellent math skills.
skills DSP Engineer with 2 years post grad experience to create DSP solutions for wireless projects, from preparing specs and designing architecture to detailed design, test, documentation and maintenance, and eventual hand-over of the full design to the client. The client applies signal-processing techniques to telecom, healthcare and consumer goods. Their expertise ranges from complex software solutions in off-the-shelf DSP chips through to DSP ASIC / FPGA cores and pure hardware implementations including cellular radio telemetry system for real-time medical monitoring, software radio ASIC for a consumer application, a cordless video-telephone system, and a sensored AC motor controller for an industrial application. You will undertake detailed design of software and hardware DSP systems, write models and simulations of processing functions. You must have a good degree in maths or engineering, solid grasp of radio comms theory, fluent programming in C or Matlab and excellent math skills.
- Real-time Software Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Software Engineer with 1st or 2.1 class degree preferably in Computer Science, Software Engineering and 2 years C , GUI (Windows API) and OOD /OOA to design real time systems including threading and Windows API synchronisation. The ideal applicant should have experience of product involvement, UML, STD, use cases, Borland C Builder or Microsoft Visual C and Networking. This is a permanent position.
skills Software Engineer with 1st or 2.1 class degree preferably in Computer Science, Software Engineering and 2 years C , GUI (Windows API) and OOD /OOA to design real time systems including threading and Windows API synchronisation. The ideal applicant should have experience of product involvement, UML, STD, use cases, Borland C Builder or Microsoft Visual C and Networking. This is a permanent position.
- RF Designer - GSM Transmitter
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
skills RF Contractor to develop a 900 MHz pico BTS and an 850 MHz variant to the relevant standards. Experience of transmitter development for a GSM product (MS or BTS) is essential and knowledge of receiver development is desirable as development of this section of the BTS is also required. Applicants must have proven circuit design, development and testing skills are needed as the BTS is to be based upon an existing approved DCS / PCS unit. There will be some system design work associated with the change in band. You must have excellent knowledge of the RF aspects of GSM: especially the requirements and methods described in GSM 05.05 and GSM 11.21 (or GSM 11.10). This contract is for 9 months and is paying iro GBP35 / hour.
- Analogue Designer for chip level work,
- posted on 24/09/2004
location Germany Germany
description Analogue Designer for chip level work, top level design, simulation. Minimum 5 years experience mandatory. Immediate start. Germany. Initial 3 months with probable extension.
skills Analogue Designer for chip level work, top level design, simulation. Minimum 5 years experience mandatory. Immediate start. Germany. Initial 3 months with probable extension.
- I.C. Full Cycle Chip Designer
- posted on 24/09/2004
location Germany Germany
description Full custom Integrated Circuit chip designer required for major client in Germany. Applicants MUST have hands-on experience in every aspect of the work from circuit design to layout.
skills Full custom Integrated Circuit chip designer required for major client in Germany. Applicants MUST have hands-on experience in every aspect of the work from circuit design to layout.
- Software Design Engineer
- posted on 24/09/2004
location England Berkshire
description Software Design Engineer with a degree in Software, Electronics, Physics or Mathematics
2+ years relevant work experience
Familiar with hardware integration
C in realtime embedded environment
Familiar with structured design techniques (UML)
Familiar with RTOS environments such as VxWorks
Windows programming
Experience with implementing data processing algorithms a plus
skills Software Design Engineer with a degree in Software, Electronics, Physics or Mathematics
hardware integration
C in realtime embedded environment
structured design techniques (UML)
RTOS environments such as VxWorks
Windows programming
implementin
- Senior Embedded Software Engineer
- posted on 24/09/2004
location Oxfordshire United Kingdom, South East
description Our client is developing IP which will significantly enhance SoC functionality, addressing some of the fundamental multi core challenges SoC designers currently face. They have already generated significant commercial momentum: their initial funding round has just been confirmed, and they have a blue chip customer which is lending support in terms of EDA tools and manpower. They are seeking a Senior Software Engineer with an excellent academic record (1st or 2:1 from red brick university) and experience of embedded software development of communications stacks. In addition you will have ported Real-Time OSs onto various platforms and processors with an understanding of their internal mechanisms and multitasking application design constraints. You should be familiar with hardware design features and limitations, possibly gained in a related degree. Use of structured development processes essential, but with a clear view on how to make such processes add to and not subtract from productivity.
skills Semiconductors, embedded, software, RTOS, real-time, ARM, ARC,
- Software Engineers - all levels
- posted on 24/09/2004
location Oxfordshire United Kingdom, South East
description Our client is developing IP which will significantly enhance SoC functionality, addressing some of the fundamental multi core challenges SoC designers currently face. They have already generated significant commercial momentum: their initial funding round has just been confirmed, and they have a blue chip customer which is lending support in terms of EDA tools and manpower. Our client is now seeking several software engineers. Your technical expertise must include some of: · Embedded Operating Systems (VxWorks, Embedded Linux etc) · Operating System kernel design · Threaded programming techniques · Multi-processor applications development issues · Software design techniques for multi-processor systems · Open Source (GNU) software development tool flows Successful candidates will have a demonstrable record of managing software development through inception to successful completion. Key personal attributes include creativity, tenacity and a team oriented outlook.
skills software, engineer, team leader, RTOS, real-time, C/C++, Assembler, embedded, operating systems, kernel design, multi-processor systems., IP, OS
- Systems Engineer - Railway Communications
- posted on 24/09/2004
location West Sussex West Sussex, UK
description Systems Engineer to design and on-site commission railway communications systems. Tasks include design and implement system solutions that meet customer requirements; provide technical support to Sales and Marketing; focus design efforts on innovation and cost minimisation; specify the systems specification to the manufacturing organisation; produce project documentation and reports; support field personnel. You MUST have BTEC / HNC or equivalent in Electrical / Electronic Engineering; 5 years experience in system manufacturing / installation and commissioning within a communications environment. Knowledge of Railway standards and practices would be advantageous. The systems will have values between GBP300 - GBP500k. Please note. This is not a board level design role and applicants with only these skills will not be considered. This role is for practical person happy to work at times in a dirty, cold and wet train depot, crawl under trains, etc.. This role is Permanent and paying iro GBP32k.
skills Systems Engineer to design and on-site commission railway communications systems. Tasks include design and implement system solutions that meet customer requirements; provide technical support to Sales and Marketing; focus design efforts on innovation and cost minimisation; specify the systems specification to the manufacturing organisation; produce project documentation and reports; support field personnel. You MUST have BTEC / HNC or equivalent in Electrical / Electronic Engineering; 5 years experience in system manufacturing / installation and commissioning within a communications environment. Knowledge of Railway standards and practices would be advantageous. The systems will have values between GBP300 - GBP500k. Please note. This is not a board level design role and applicants with only these skills will not be considered. This role is for practical person happy to work at times in a dirty, cold and wet train depot, crawl under trains, etc.. This role is Permanent and paying iro GBP32k.
- Electro-Optics Systems Engineer
- posted on 24/09/2004
location Somerset Somerset, UK
description Electro-Optics Systems Engineer with good all round experience to develop specifications and co-ordinating the prototype build, test and production of a sighting system for a light armoured (land) vehicle. The applicant must have at least 3 years post-graduation experience in opto-mechanics (visible, infra red and laser) and electronics including EMC design and testing and have experience the DOORS requirement management tool. This contract is based in Somerset, is for 6 months and is paying GBP35 / hour.
skills Electro-Optics Systems Engineer with good all round experience to develop specifications and co-ordinating the prototype build, test and production of a sighting system for a light armoured (land) vehicle. The applicant must have at least 3 years post-graduation experience in opto-mechanics (visible, infra red and laser) and electronics including EMC design and testing and have experience the DOORS requirement management tool. This contract is based in Somerset, is for 6 months and is paying GBP35 / hour.
- Audio Visual Project Engineer
- posted on 24/09/2004
location Kent Kent, UK
description Audio Visual Project Engineer to design and manage multiple projects in the video display marketplace. You will manage audio visual projects from concept to completion within the budgeted cost; design audio visual systems including purchasing of necessary system components; liase with other internal departments, clients and contractors and on-site commission and program of systems. Ideally you will be well-organised and flexible and able to approach different types of tasks during the working day; have the ability to prioritise and work under pressure; have good technical knowledge of electronics and audio visual systems; be competent to a high level of computer literacy; be able to work as part of a team, be capable of good communication skills both verbal and written, be able to communicate with company executives to building contractors. This is a permanent role paying iro GBP25k and based north west Kent.
skills Audio Visual Project Engineer to design and manage multiple projects in the video display marketplace. You will manage audio visual projects from concept to completion within the budgeted cost; design audio visual systems including purchasing of necessary system components; liase with other internal departments, clients and contractors and on-site commission and program of systems. Ideally you will be well-organised and flexible and able to approach different types of tasks during the working day; have the ability to prioritise and work under pressure; have good technical knowledge of electronics and audio visual systems; be competent to a high level of computer literacy; be able to work as part of a team, be capable of good communication skills both verbal and written, be able to communicate with company executives to building contractors. This is a permanent role paying iro GBP25k and based north west Kent.
- Mechanical Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Mechanical Engineer to design proprietary ink jet printing technologies, develop ink supply / maintenance systems. Design / spec. ink supply components, assembly, test / debug special-purpose ink supply test systems, experimental evaluation of ink supply components / systems, design, specify / evalue fluid sensors / instrumentation, design, manufacture / commission print head test system hardware, maintenance of system documentation, supplier liaison / purchasing, preparation for / conducting client demonstrations. Must have 1st or 2:1 degree in engineering, 2 yrs post-graduate exp. in commercial development environment, exp. in design, development / test of fluid handling / control systems, 3D CAD exp., hands-on laboratory / mechanical workshop skills. Benefits inc. 25 days hols, private medical / group life insurance, pension, share scheme, reloc. package, staff restaurant / sports facilities. This position is permanent / salaries are according to experience.
skills Mechanical Engineer to design proprietary ink jet printing technologies, develop ink supply / maintenance systems. Design / spec. ink supply components, assembly, test / debug special-purpose ink supply test systems, experimental evaluation of ink supply components / systems, design, specify / evalue fluid sensors / instrumentation, design, manufacture / commission print head test system hardware, maintenance of system documentation, supplier liaison / purchasing, preparation for / conducting client demonstrations. Must have 1st or 2:1 degree in engineering, 2 yrs post-graduate exp. in commercial development environment, exp. in design, development / test of fluid handling / control systems, 3D CAD exp., hands-on laboratory / mechanical workshop skills. Benefits inc. 25 days hols, private medical / group life insurance, pension, share scheme, reloc. package, staff restaurant / sports facilities. This position is permanent / salaries are according to experience.
- Mechanical Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Mechanical Engineer with a good degree (1st or 2.1). Three years experience in mechanical design (and possibly manufacture) in a hi-tech electronics environment. Strong organisational and project management capabilities. Good communication skills. Able to demonstrate initiative and commitment. Excellent company benefits including 25 days holiday, private medical insurance, group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
skills Mechanical Engineer with a good degree (1st or 2.1). Three years experience in mechanical design (and possibly manufacture) in a hi-tech electronics environment. Strong organisational and project management capabilities. Good communication skills. Able to demonstrate initiative and commitment. Excellent company benefits including 25 days holiday, private medical insurance, group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
- Senior Electronics / Embedded Software Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Senior Electronics / Embedded Software Engineer with good consulting skills to develop business / lead projects. Must have outstanding technical capabilities plus practical exp.. 1st class engineer with 5 yrs exp. in product development. 1st or 2.1 degree from good engineering university. Proven project management capabilities. Leading projects and teams and managing customers. Previous exp. of consulting an advantage. You should understand electronic hardware / systems, knowledge of embedded C /C , understand real-time / hardware, hardware/software system level design. Personal qualities include: self-starter - use initiative / take responsibility, creative but pragmatic /self-critical, good communicator – both teams / clients, enthusiasm / determination. Excellent benefits inc. 25 days hols, private medical / group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
skills Senior Electronics / Embedded Software Engineer with good consulting skills to develop business / lead projects. Must have outstanding technical capabilities plus practical exp.. 1st class engineer with 5 yrs exp. in product development. 1st or 2.1 degree from good engineering university. Proven project management capabilities. Leading projects and teams and managing customers. Previous exp. of consulting an advantage. You should understand electronic hardware / systems, knowledge of embedded C /C , understand real-time / hardware, hardware/software system level design. Personal qualities include: self-starter - use initiative / take responsibility, creative but pragmatic /self-critical, good communicator – both teams / clients, enthusiasm / determination. Excellent benefits inc. 25 days hols, private medical / group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
- Optical Physicist
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Optical Physicist with excellent academic background with at least: 1st degree in Physics or similar and PhD and or 3 years’ experience in experimental Physics RandD. Must have strong experimental analytical capability on Optical systems design and imaging. Must be bright, diligent and enthusiastic. Excellent company benefits including 25 days holiday, private medical insurance, group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
skills Optical Physicist with excellent academic background with at least: 1st degree in Physics or similar and PhD and or 3 years’ experience in experimental Physics RandD. Must have strong experimental analytical capability on Optical systems design and imaging. Must be bright, diligent and enthusiastic. Excellent company benefits including 25 days holiday, private medical insurance, group life insurance, pension, share scheme, relocation package, staff restaurant and sports facilities. This position is permanent and salaries are according to experience.
- Test & Assembly Engineer
- posted on 24/09/2004
location Somerset Somerset
description A Test & Assembly Engineer is required by our client who design and develop survery equipment for a variety of marine industries. The ideal person will have relevant experience of testing PCB's and fault-finding to component level while also having the ability to rework surface-mount components. Experience of wiring simple cable assemblies and small equipment racking would be advantageous. Some overseas travel opportunities may be available.
skills electronics
test
assembly
component
pcb
- Electronics Engineer
- posted on 24/09/2004
location Gloucestershire Gloucestershire
description Our client has an opening for an Electrical Engineer to support the engineering development and testing of electronics products. In this role, the successful candidate will perform electronic circuit design, support calculations and analysis, printed circuit board modifications and layout for EMC considerations, plan and conduct product testing, evaluation, and qualification. Candidates will perform support activities such as design reviews and Failure Mode Effects Analysis (FMEA) of existing de
skills embedded
controls
electronics
hydraulic
- Development Engineer
- posted on 24/09/2004
location Gloucestershire Gloucestershire
description Our Client has an opening for a Development Engineer whose primary function will be to drive the development of hydro-mechanical valves for use in mobile / industrial applications. The successful candidate will have a practical approach to the design and progression of the design or concept through the developmental phase and onto the production phase.
skills valves
development
design
hydro-mechanical
- Senior Mechanical Design Engineer.
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Senior Mechanical Design Engineer. The Power Products group specialises in design / development of products for high volume manufacture, primarily in consumer product and automotive industries. You will take lead mechanical design role to include hands-on product development, design of mechanical systems and components, project management and liaison with clients. You will have a first degree covering dual disciplines of product design and mechanical engineering or an engineering degree plus postgraduate design qualification. You must have 3 years exp. in product development, have a highly creative approach to problem solving and concept generation, hands-on experience of 3D CAD, preferably Pro/Engineer Wildfire or Unigraphics, exp. of detail design of components, rapid prototyping methods and have an in depth knowledge of high volume manufacturing methods. Direct experience in product development ideally in consumer product or automotive industries. Salary GBP40k - GBP50.
skills Senior Mechanical Design Engineer. The Power Products group specialises in design / development of products for high volume manufacture, primarily in consumer product and automotive industries. You will take lead mechanical design role to include hands-on product development, design of mechanical systems and components, project management and liaison with clients. You will have a first degree covering dual disciplines of product design and mechanical engineering or an engineering degree plus postgraduate design qualification. You must have 3 years exp. in product development, have a highly creative approach to problem solving and concept generation, hands-on experience of 3D CAD, preferably Pro/Engineer Wildfire or Unigraphics, exp. of detail design of components, rapid prototyping methods and have an in depth knowledge of high volume manufacturing methods. Direct experience in product development ideally in consumer product or automotive industries. Salary GBP40k - GBP50.
- Principal Medical Electronics Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Principal Medical Electronics Engineer to lead multi-disciplinary teams on major development projects. The role includes developing new relationships with clients, expand existing relationships and identify new business opportunities. This is a good opportunity for an experienced electronics engineer with a medical background. You will be responsible for; technical leadership of projects with an advanced medical electronics content; definition of system architectures; detailed electronic design and implementation. You must have an excellent first degree or post graduate degree in electronic engineering or a related discipline and between 5 - 10 years in a medical environment. You will have knowledge of medical physics and an understanding of how electronics can be used in the diagnosis and treatment of disease. Experience in Instrumentation; Signal Conversion; Control Theory; Power Supplies and System Design is desirable. Salary iro GBP50k.
skills Principal Medical Electronics Engineer to lead multi-disciplinary teams on major development projects. The role includes developing new relationships with clients, expand existing relationships and identify new business opportunities. This is a good opportunity for an experienced electronics engineer with a medical background. You will be responsible for; technical leadership of projects with an advanced medical electronics content; definition of system architectures; detailed electronic design and implementation. You must have an excellent first degree or post graduate degree in electronic engineering or a related discipline and between 5 - 10 years in a medical environment. You will have knowledge of medical physics and an understanding of how electronics can be used in the diagnosis and treatment of disease. Experience in Instrumentation; Signal Conversion; Control Theory; Power Supplies and System Design is desirable. Salary iro GBP50k.
- Business Developer, Surgical and Medical Systems
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Business Developer, Surgical and Medical Systems selling product design and development and technology consulting services to clients in the healthcare industry. Identifying medical products companies that are potential clients, identifying sales opportunities, working with and guiding technical teams through to sales conversion. The role will require interaction with teams which includes: mechanical engineering; product design; software and electronics; Informatics; manufacturing technology; process automation; life sciences. You must have a good degree in the engineering or life sciences plus several years commercial experience in medical product development, sales experience with a design and development services company or sales experience with a medical products company. Other attributes:knowledge and experience of product development in a regulated environment; excellent interpersonal, communication and presentation skills. Salary iro GBP50k
skills Business Developer, Surgical and Medical Systems selling product design and development and technology consulting services to clients in the healthcare industry. Identifying medical products companies that are potential clients, identifying sales opportunities, working with and guiding technical teams through to sales conversion. The role will require interaction with teams which includes: mechanical engineering; product design; software and electronics; Informatics; manufacturing technology; process automation; life sciences. You must have a good degree in the engineering or life sciences plus several years commercial experience in medical product development, sales experience with a design and development services company or sales experience with a medical products company. Other attributes:knowledge and experience of product development in a regulated environment; excellent interpersonal, communication and presentation skills. Salary iro GBP50k
- Senior RF IC Designer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Senior RF IC Designer to lead design of complex analogue radio integrated circuits on CMOS and BiCMOS processes. Design / develop complete radio / wireless products from radio integrated circuits to wireless terminal equipment and complete wireless systems. Develop specs and architectures for radio integrated circuits; design advanced radio ICs; supervise layout and back-end processes for complete radio ICs; participate in sales meetings; prepare and contribute to proposals and quotations. You must have 7 years exp. as RF IC designer for a telecoms company, have extensive exp. of RF circuit and system design. Be familiar with defining architecture of radio systems on ICs to analyse performance of systems. A good knowledge of RF and IC CAD tools as well as the traditional chart-based tools. The ideal candidate would have exp. in one or more of: synthesiser and PLL design; ADC design; LNA design; ability to work with digital signal processing and modem designers. Salary iro GBP50k.
skills Senior RF IC Designer to lead design of complex analogue radio integrated circuits on CMOS and BiCMOS processes. Design / develop complete radio / wireless products from radio integrated circuits to wireless terminal equipment and complete wireless systems. Develop specs and architectures for radio integrated circuits; design advanced radio ICs; supervise layout and back-end processes for complete radio ICs; participate in sales meetings; prepare and contribute to proposals and quotations. You must have 7 years exp. as RF IC designer for a telecoms company, have extensive exp. of RF circuit and system design. Be familiar with defining architecture of radio systems on ICs to analyse performance of systems. A good knowledge of RF and IC CAD tools as well as the traditional chart-based tools. The ideal candidate would have exp. in one or more of: synthesiser and PLL design; ADC design; LNA design; ability to work with digital signal processing and modem designers. Salary iro GBP50k.
- Senior RF System Architect
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Senior RF System Architect to lead the complete development cycle from preparing the specs to hand-over to volume production. The client develops telecommunications, healthcare, consumer goods and automotive products (including DECT, Bluetooth, cellular radio telemetry, etc.) You will be responsible for: leading major programmes as Chief Engineer and supervising design of circuits to component, participating in sales meetings; preparing and contributing to proposals and quotations. You must have 7 years experience as radio designer for a telecoms company and have extensive experience of RF circuit and system design. You will be familiar with defining architecture of radio systems to analyse transmitter / receiver performance; matching of RF amplifier stages; stability / noise figure analysis. You should have good knowledge of CAD tools as well as the traditional chart-based tools. Synthesiser and PLL design; Filter design; Antenna design in the GHz region. Salary iro GBP50k
skills Senior RF System Architect to lead the complete development cycle from preparing the specs to hand-over to volume production. The client develops telecommunications, healthcare, consumer goods and automotive products (including DECT, Bluetooth, cellular radio telemetry, etc.) You will be responsible for: leading major programmes as Chief Engineer and supervising design of circuits to component, participating in sales meetings; preparing and contributing to proposals and quotations. You must have 7 years experience as radio designer for a telecoms company and have extensive experience of RF circuit and system design. You will be familiar with defining architecture of radio systems to analyse transmitter / receiver performance; matching of RF amplifier stages; stability / noise figure analysis. You should have good knowledge of CAD tools as well as the traditional chart-based tools. Synthesiser and PLL design; Filter design; Antenna design in the GHz region. Salary iro GBP50k
- Business Developer - RFIC Developer.
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Business Developer - RFIC Developer. Design and development of complete radio / wireless products ranging from radio integrated circuits through wireless terminal equipment and complete wireless systems. You will identify target companies and match them with appropriate technical offerings; initiate contact, make pre-sales visits and identify prospective business; build sales propositions and develop them into commercial relationships with clients; lead the bid teams; mentor the senior technical members of the RF IC team - delegating the line management of the team to them; close sales - negotiating terms and conditions. You must have 5 years experience and track-record of radio, high performance analogue and mixed signal CMOS IC design; experience of the IC design and sign-off process; high-value, technical sales; market knowledge of existing technology (wi-fi, 802.15, DECT, Bluetooth, GSM/3G); degree in an appropriate engineering subject. Salary iro GBP50k.
skills Business Developer - RFIC Developer. Design and development of complete radio / wireless products ranging from radio integrated circuits through wireless terminal equipment and complete wireless systems. You will identify target companies and match them with appropriate technical offerings; initiate contact, make pre-sales visits and identify prospective business; build sales propositions and develop them into commercial relationships with clients; lead the bid teams; mentor the senior technical members of the RF IC team - delegating the line management of the team to them; close sales - negotiating terms and conditions. You must have 5 years experience and track-record of radio, high performance analogue and mixed signal CMOS IC design; experience of the IC design and sign-off process; high-value, technical sales; market knowledge of existing technology (wi-fi, 802.15, DECT, Bluetooth, GSM/3G); degree in an appropriate engineering subject. Salary iro GBP50k.
- Business Developer - Wireless Enabled Products
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Business Developer - Wireless Enabled Products to develop business for design and development of innovative radio / wireless enabled products ranging from radio integrated circuits through wireless terminal equipment and complete wireless systems. You will be required to identify target companies and match them with appropriate technical offerings; identify a winning strategy for further exploitation of the client’s Bluetooth intellectual property; initiate contact, make pre-sales visits and identify prospective business; build sales propositions and develop them into commercial relationships with clients; lead the bid teams,; close sales - negotiating terms and conditions. You must have experience and track-record of high-value, technically complex sales; wireless product development experience; market knowledge of existing technology (wi-fi, 802.15, DECT, Bluetooth, GSM/3G) and a degree in an appropriate engineering subject. Salary GBP35k - GBP50k.
skills Business Developer - Wireless Enabled Products to develop business for design and development of innovative radio / wireless enabled products ranging from radio integrated circuits through wireless terminal equipment and complete wireless systems. You will be required to identify target companies and match them with appropriate technical offerings; identify a winning strategy for further exploitation of the client’s Bluetooth intellectual property; initiate contact, make pre-sales visits and identify prospective business; build sales propositions and develop them into commercial relationships with clients; lead the bid teams,; close sales - negotiating terms and conditions. You must have experience and track-record of high-value, technically complex sales; wireless product development experience; market knowledge of existing technology (wi-fi, 802.15, DECT, Bluetooth, GSM/3G) and a degree in an appropriate engineering subject. Salary GBP35k - GBP50k.
- R.F. Design Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description R.F. Design Engineer (full cycle) to design radio systems for telecoms, healthcare, consumer goods and automotive applications inc. DECT and Bluetooth. As part of a close-knit multi-disciplinary team the ideal consultant will be responsible for design of radio circuits to component and printed circuit level, guiding and reviewing the layout; specifying test requirements and limits for the radio functions; working from and preparing specifications for radio system functions. Applicants must have 3 years working as a radio designer in the telecommunications or related areas with extensive exp. of RF circuit design, design of a wide range of RF circuit functions inc. matching of RF amplifier stages, stability analysis, noise figure analysis; synthesiser and PLL design, filter design; antenna design in the GHz region. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary range GBP35k to GBP50k.
skills R.F. Design Engineer (full cycle) to design radio systems for telecoms, healthcare, consumer goods and automotive applications inc. DECT and Bluetooth. As part of a close-knit multi-disciplinary team the ideal consultant will be responsible for design of radio circuits to component and printed circuit level, guiding and reviewing the layout; specifying test requirements and limits for the radio functions; working from and preparing specifications for radio system functions. Applicants must have 3 years working as a radio designer in the telecommunications or related areas with extensive exp. of RF circuit design, design of a wide range of RF circuit functions inc. matching of RF amplifier stages, stability analysis, noise figure analysis; synthesiser and PLL design, filter design; antenna design in the GHz region. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary range GBP35k to GBP50k.
- Principal Analogue Electronics Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Principal Analogue Electronics Engineer to lead system architectures, analogue electronic and power electronic design. Power Products Group specialises in design and development of mechatronics, high volume consumer products, automotive and industrial drive products based around analogue / mixed signal electronics, motor and drive technology, advanced control system design power electronics, mechanical engineering. Responsible for technical leadership of projects and managing complex multidisciplinary projects. You will have an excellent first degree or post graduate degree in electronic engineering or a related discipline and 5 - 10 years relevant exp. inc. some of the following: low level signal sensor design, switching circuits, power supplies, motor control, thermal management, embedded , EMC, mixed signal design, design for high volume production. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary GBP35k to GBP50k
skills Principal Analogue Electronics Engineer to lead system architectures, analogue electronic and power electronic design. Power Products Group specialises in design and development of mechatronics, high volume consumer products, automotive and industrial drive products based around analogue / mixed signal electronics, motor and drive technology, advanced control system design power electronics, mechanical engineering. Responsible for technical leadership of projects and managing complex multidisciplinary projects. You will have an excellent first degree or post graduate degree in electronic engineering or a related discipline and 5 - 10 years relevant exp. inc. some of the following: low level signal sensor design, switching circuits, power supplies, motor control, thermal management, embedded , EMC, mixed signal design, design for high volume production. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary GBP35k to GBP50k
- Analogue Electronics Engineer
- posted on 24/09/2004
location Cambridgeshire Cambridgeshire, UK
description Analogue Electronics Engineer to work in the Power Products Group which specialises in design and development of products inc., mechatronics, high volume consumer products, automotive and industrial drive products. Skills inc: concept generation, analysis of system architectures, analogue electronic and power electronic design, liaise with others across many engineering disciplines and be involved in specifying, designing and executing experimental programmes with teams of scientists and technicians. There are opportunities for this side of the role to develop rapidly into management of projects including having full responsibility for delivery to our clients. You should have an excellent first degree in electronic engineering or a related discipline, strong technical and analytical skills with post doctural or industrial experience an advantage. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary range GBP35k to GBP50k
skills Analogue Electronics Engineer to work in the Power Products Group which specialises in design and development of products inc., mechatronics, high volume consumer products, automotive and industrial drive products. Skills inc: concept generation, analysis of system architectures, analogue electronic and power electronic design, liaise with others across many engineering disciplines and be involved in specifying, designing and executing experimental programmes with teams of scientists and technicians. There are opportunities for this side of the role to develop rapidly into management of projects including having full responsibility for delivery to our clients. You should have an excellent first degree in electronic engineering or a related discipline, strong technical and analytical skills with post doctural or industrial experience an advantage. Benefits include flexitime, profit share scheme, free lunches / refreshments, private medical and pension scheme. Salary range GBP35k to GBP50k
- Electronics/Software Engineer
- posted on 24/09/2004
location England Hampshire
description We are looking for an experienced Software/Electronics Design Engineer with excellent knowledge of embedded design using C. You will also possess good working knowledge of both the 8051 & ARM7 microprocessors. Some digital design in relation to design and development of control systems is also essential. The ideal candidate will have knowledge of high speed processing, analogue design, a working knowledge of front-end GUI's for PC applications and some understanding of interfacing protocols f
skills software
electronics
embedded
digital
microprocessors
- PSU Design Engineer
- posted on 24/09/2004
location England Hampshire
description We require an experienced Power Supply Design Engineer with good knowledge of SMPS design. You will be expected to undertake all design activities from circuit design through to qualification testing and support. The ideal candidate will have worked on multi-output power supplies, wide temperature ranges and will have worked on power ranges from 10W - 1KW although designs will generally be between 50-200W. All round general power supply design experience will also be considered.
skills power supply
smps
design
- Electronics Project Engineer
- posted on 24/09/2004
location England Hampshire
description An Electronics Project Engineer is needed to work on the design of electronics control systems & sub systems in relation to specific customer requirements. You will require good client skills to create technical specs, design/development of embedded software for microcontrollers in C and of associated hardware. You will have excellent knowledge of electrical/electronics design theory and of AC/DC motor control systems coupled with innovative design skills.
skills electronics
software
design
embedded
ac/dc
motor controls
- ASIC DesignEngineer
- posted on 24/09/2004
location Surrey United Kingdom, South East
description Our client is a succesful product development company (circa 20 people) specialising in the development of advanced wireless products for the consumer electronics market. Their expertise includes complex System on Chip design, embedded and PC application software, radio and baseband hardware development. They have an opening for a design Engineer with 2-5 years ASIC experience, covering RTL code, simulation, DFT, synthesis and STA. You will also have an excellent academic record with equivalent of 1st or 2:1 degree from good university. Please call to discuss in more detail on 0208 400 2444 or email james@ic-resources.co.uk
skills ASIC, IC, semiconductors, VHDL, Verilog, SoC, RTL, simulation, DFT, synthesis, STA, FPGA, Unix, processor, jobs
- Electronics Design Manager
- posted on 23/09/2004
location Cambridgeshire United Kingdom, Cambridgeshire
description This is an opportunity to join one of the UKs most dynamic electronics organisations. Designing and supplying ICs for a rapidly expanding segment of the communications market, our client now seeks an electronics design manager who combines excellent engineering skills with the ability to supervise a variety of projects simultaneously. The role would suit a senior engineer or a hands on manager. Designing complex reference boards that emulate the functionality of customers products, the successful candidate must be a talented design engineer with the ability to deliver low cost products to tight timescales. As well as operating as the teams senior engineer, this individual will manage designers and technicians, ensuring that a number of projects are all on track for successful completion. The successful candidate will have extensive analogue and digital electronics design experience, ideally with familiarity of low cost, micropower, EMC, and audio. C and assembler knowledge would be beneficial. Remuneration package will be commensurate with experience, career prospects will be excellent.
skills Electronics, design, analogue, digital, hands on, circuits, reference boards, low cost, micropower, EMC, audio, C, assembler, team leader, manager, supervisory., op-amps, VB, embedded, psu, smps
- Test Hardware / ATE Engineer
- posted on 22/09/2004
location South Yorkshire
description Test Hardware / ATE Engineer
Yorks
The succesful candidate will be responsible for the specification, design (from component level), development and maintenance of high quality test systems.
The role will require you to spend time at a subcontractor site in order to install and commission the test systems, as well as diagnosing production issues and implementing corrective actions.
You will undertake schematic generation and validation, and work with test software engineers on the development of firmware and hardware test routines to support hardware design.
It is essential that you have several years experience in a commercial / industrial development environment. This may have been in areas such as telecoms, consumer electronics, aerospace or automotive engineering. You should have some experience of managing projects and teams, and understand the importance of timescale in taking a product through its development lifecycle.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com
For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
- Principal Software Engineers
- posted on 22/09/2004
location South Yorkshire
description W. Yorks
£28k-£42k
These challenging roles will involve responsibility for the complete software lifecycle, covering specification, coordination, resourcing and the design process.
Applying your detailed knowledge of programming languages such as C, C++ and Assembler, you?ll work on large and complex multi-disciplinary projects that utilise the full software engineering life cycle and structured design methodologies (OOA/OOD).
You should have completed more than one large, complex and multi-disciplinary project, taking them from concept all the way through to manufacturing. This is likely to have been in an industry such as consumer electronics, aerospace, telecoms or automotive.
An excellent communicator, with an appetite for a challenge, you should have experience in Real Time Applications and Operating Systems, ideally in conjunction with embedded systems.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com
For further details on this and many other vacancies visit our website at www.redlineplc.com
skills
- Software Team Leader
- posted on 22/09/2004
location South Yorkshire
description W. Yorks
£34k-£42k
This challenging role will involve responsibility for the complete software lifecycle, covering specification, coordination, resourcing and the design process.
You will have started your career in real-time software development using C, C++ or assembler. From here you will have moved into more of a management role, including the mentoring of more junior engineers and the development of structured design methodologies (OOA/OOD).
You should have completed more than one large, complex and ulti-disciplinary project, taking them from concept all the way through to manufacturing. This is likely to have been in industries such as consumer electronics, aerospace, telecoms or automotive.
To apply for this position please contact Andy Grant on 01582 450054 or AGrant@Redlineplc.com.
For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
- Software Engineer- C,C++,Networking
- posted on 22/09/2004
location Hereford and Worcester Worcestershire, Warwickshire, Birmingham
description My client is seeking an individual to design and develop security system software services. Ideal candidates will be of-
Graduate level education with recent programming experience is required as well as detailed knowledge of the C++ programming language. Experience of developing software in the Microsoft Windows environment, using Visual Studio 6 and SourceSafe is essential. Knowledge of systems programming and multi-threading networking applications is desirable. Experience of commercial s
skills Graduate level education with recent programming experience is required as well as detailed knowledge of the C++ programming language. Experience of developing software in the Microsoft Windows environment, using Visual Studio 6 and SourceSafe is ess
- Graduate Software Engineer, C,++,Embedded,RTOS,Tel
- posted on 22/09/2004
location Berkshire Berkshire, Surrey ,London
description My client is a leader in developing of 3G handsets.
You will be involved in the involved in the complete lifecycle of the product development starting with requirements capture and analysis through to design and verification. Ideal candidates will have the following-
Experience/knowledge in most of the following:
C/C++
Java
Structured design techniques particularly UML
Working as part of a larger project team
SW development for embedded products
S/W development lifecycle
Desirable Exper
skills C/C++
Java
Structured design techniques particularly UML
Working as part of a larger project team
SW development for embedded products
S/W development lifecycle
Desirable Experience
Other programming languages, configuration management, makefi
- Software Engineer/Electronics C,C++,Firmware,Medic
- posted on 22/09/2004
location Warwickshire Warwickshire,Midlands
description My client is involved in providing creative and practical design solutions, on time and to budget. They work with the latest technologies, materials and processes in a broad range of business sectors for both home and global markets.
They currently have a vacancy for a design engineer with good working knowledge of C,C++ and Electronics (DSP)
Ideal candidates will have a background in developing medical products.
skills C,C++,DSP,Electronics,Medical
- Physics,Maths Programmers
- posted on 22/09/2004
location Greater London London,Surrey,Cambridge
description My Clients are leaders in developing software and Mathematical models for a variety of industries including Audio,Games,Defence and Multimedia. They are currently recruiting Engineers/Scientists with good degrees 2.1+ and excellent A level/S level grades.
You will be involved in product development and research.
Working experience of any of the following will be advantageous.
C,C++,Java,GUI,OOD,OpenGL,DirectX,Embedded,Hardware,3D Graphics,Analogue,Digital design
skills C,C++,Java,GUI,OOD,OpenGL,DirectX,Embedded,Hardware,3D Graphics,Analogue,Digital design
- Software Engineer- C,C++,Telecoms
- posted on 22/09/2004
location England Surrey,Berks,London
description My client is a leader in the design and development of Satelite communication systems. The are looking to recruit an experienced Software Developer/Project Manager to work in a communications R&D environment. We seek good overall software development and engineering skills coupled with proven project management abilities. Ideal candidates will have strong C Programming and an in-depth knowledge of communications systems and software. It is desirable to have knowledge of TCP/IP and programming
skills strong C Programming and an in-depth knowledge of communications systems and software. It is desirable to have knowledge of TCP/IP and programming for embedded systems, including embedded
Linux.
- Software Engineer- C,C++,Control
- posted on 21/09/2004
location East Sussex sussex
description My client is a leader in the development of scientific instrumentation.
You will be involved in design and development-
Ideal candidates will have-
·3+ years experience of programming using ladder logic for PLCs (Koyo or similar)·
Solid experience of industrial control systems software, both embedded and supervisory, including generalised I/O and hardware/software interfacing, PLCs, industrial PCs or embedded computers ·
Good understanding of the engineering lifecycle, from requirements
skills 3+ years experience of programming using ladder logic for PLCs (Koyo or similar)·
Solid experience of industrial control systems software, both embedded and supervisory, including generalised I/O and hardware/software interfacing, PLCs, industrial
- Power Supply Design Engineer
- posted on 21/09/2004
location Isle of Wight Isle of Wight, South East, UK
description With a desirable reputation for developing some of the world’s most advanced Power Supplies, our client is seeking a talented Engineer specialising in switch mode power converter design with experience of SMPS’s, EMI filter design and Forward, Flyback, Bridge and Boost topologies.
skills Power Supply Design, SMPS
- Hardware Design Engineer
- posted on 21/09/2004
location North Yorkshire York, Yorkshire, North East, England, UK
description One of the worlds leading providers of networking solutions are seeking a motivated, hands-on Engineer, qualified to HND or above with at least 2 years experience of some of the following:
„X High Speed Digital Design
„X Board Level Design
„X Design for Manufacture
„X FPGA Design
„X Optical System Design
„X Low Power Analogue Design
„X System Level Design.
skills Digital, Analogue, Optical, FPGA
- Embedded Design Engineer
- posted on 21/09/2004
location East Sussex East Sussex, South East, England, UK
description Our client, involved in the design and build of a wide range of electronics systems, is seeking a real “all-rounder” to take the lead in the design of exciting, innovative products. You will be Degree qualified with at least 3 years relevant experience in a Design role and have experience of embedded hardware and software design, FPGA, microprocessor firmware design, C programming, digital and analogue circuit design and PCB design/layout. An excellent opportunity offering a variety of design ch
skills embedded hardware and software design, C programming, digital and analogue circuit design and PCB design/layout
- Senior Digital Design
- posted on 21/09/2004
location Warwickshire Warwickshire, West Midlands, Midlands, England, UK
description One of the market leaders in their field is seeking an accomplished Design Engineer with a broad background in developing digital electronics. The ideal candidate will have an HND or above with 5 years+ experience in a Design/Development role and have experience of digital and some analogue/power electronics design taking EMC requirements into consideration.
skills Digital, EMC
- Junior Design Engineer
- posted on 21/09/2004
location North Yorkshire York, Yorkshire, North East, England, UK
description One of the world’s most innovative companies providing solutions to optoelectronic, wireless and silicon semiconductor manufacturers is seeking a Junior Design Engineer with good knowledge of microprocessors and analogue and digital circuit design. The role would suit a recent Graduate with a desire to progress within a technology leading organisation.
skills microprocessors, analogue and digital circuit design
- Innovative Design Engineers
- posted on 21/09/2004
location Cambridgeshire Cambridge, Cambridgeshire, East Anglia, England, U
description A company involved in the development of technology based solutions for a wide range of clients are seeking Engineers with at least a 2.1 Degree and a passion for engineering science and its application! Experience will include analogue and digital electronics, microcontrollers, PCB design, mechanical design and DSP. Recent Graduates will be considered.
skills Analogue, Digital, Microcontrollers, PCB, DSP
- Field Application Engineer for System Level Design
- posted on 20/09/2004
location UK Germany (Munich, Bavaria)
description Our client, a gloabal leading provider of software/hardware design automation solutions is currently looking to employ a Professional Field Application Engineer to work in the Munich/Germany office.
You provide technical expertise for the System Level Design and Verification software in pre-sales and post-sales situations; you help Account managers identify and qualify the match-up between account needs and software products; you develop and deliver software demonstration and technical presentations; you assist customers in their evaluations of software.
You are degree educated ( Electrical Engineering ); you have 3 years experience in C/C++, hardware design (HDL ), ESL. You have gained more than 2 years experience in a sales environmen t and you are willing to travel within Central Europe.
English speaking environment, no German needed.
Please forward your CV ( Word Format ) to: paulk@euro-skills.com
skills hardware design, systel level design, verification, application engineer
- Embedded Hardware/Software Design
- posted on 20/09/2004
location England Hants, Hampshire, South East, England, UK
description Delivering state-of-the-art products to a wide variety of industries, this company is seeking an Embedded Hardware and Software design with excellent experience of high speed processing, analogue design, microprocessors, embedded design using "C" software and, ideally, some knowledge of control systems development.
skills Embedded Hardware/Software, C, microprocessors
- Software Engineer-Test,C++,Telecoms
- posted on 17/09/2004
location Buckinghamshire Buckinghamshire, Hertfordshire
description To work as part of a team creating the software to develop a range of handheld test products and features for a world telecommunications market. ideal candidates will have
2 years relevant experience of Design, Development, Test and Documentation of real-time, embedded software.
'C' and ‘C++’ Programming with Data/Telecomms experience.
Desirable:
4 years relevant experience of Design, Development, Test and Documentation of real-time software for embedded and Windows/Windows CE/Pocket PC e
skills 2 years relevant experience of Design, Development, Test and Documentation of real-time, embedded software.
'C' and ‘C++’ Programming with Data/Telecomms experience.
- Software Engineer,Control,Robotics
- posted on 17/09/2004
location Kent Kent
description My client designs and manufactures special purpose machinery, supplying equipment to the Automotive, Hydraulic, Oil and gas, and the paper making industrial sectors.
The successful candidate will be involved in the construction of new machine control programs using Microsoft C++ and Visual basic, plus administering existing code. The role will involve liaising with machine mechanical and electrical design engineers and customers producing software specifications and programs. Loading softwar
skills Programming skills in Microsoft software C++ and Visual Basic.
Basic knowledge of machine control systems.
PLC programming knowledge
Understanding of electrical control diagrams and systems
Understanding of PC hardware.
PC Network setup and admi
- Hardware Systems Engineer
- posted on 17/09/2004
location Kent Kent, South East, England, UK
description A company involved in the design and manufacture of state-of-the-art special purpose machinery are seeking a self motivated individual with experience of programming machinery such as assembly systems (PLC's), robotics, test machinery and special purpose machinery. You with preferably have experience in Visual Basic, C/C++, SCADA, PLC's, PC's, HMI's, robotics and vision systems, the design of control systems and writing the software for an array of projects.
skills PLC/SCADA, Visual Basic, C/C++, HMI's, robotics, vision systems
- Electronic Hardware Engineer/Design Engineer x 2
- posted on 17/09/2004
location England South Coast-Dorset
description Our Client has an immediate requirement for an Electronics Hardware engineer with Digital Design knowledge using mixed technologies including ECL TTL CMOS EPLD and FGPA’s to frequencies in excess of 100Mhz. Engineers should also possess a similar level of Analogue expertise for specific applications from DC to RF frequencies. Consultants will also be required to generate the necessary design documentation including Design, Procurement, Test, and Environmental Trials Specifications as well as de
skills Our Client has an immediate requirement for an Electronics Hardware engineer with Digital Design knowledge using mixed technologies including ECL TTL CMOS EPLD and FGPA’s to frequencies in excess of 100Mhz. Engineers should also possess a similar lev
- Senior Electronics Engineer - to £50k
- posted on 17/09/2004
location West Sussex West Sussex, South East, England, UK
description This is an outstanding opportunity for an equally outstanding individual to fill a crucial role within one of the UK’s most innovative instrumentation companies. They are seeking a Senior Electronics Engineer with at least 5 years experience of electronics design, which will include knowledge of the following: high power distribution systems, high power switch-mode PSUs, medium power RF generators, control systems, including generalised I/O and hardware/software interfacing, PLCs, industrial PC
skills Electronics Design, Power Supply, Lasers
- Senior Electronics Design Engineer
- posted on 17/09/2004
location Cambridgeshire Cambridge
description An advanced technology company, with a history of launching first to market products, seeks an experienced Electronic Engineer to be involved in the development of a wide variety of scientific instruments and associated systems.
skills Scientific instrumentation, electronics design, DFM, EMC
- Software Design Engineer
- posted on 17/09/2004
location England Berkshire
description Software Design Engineer with a degree in Software, Electronics, Physics or Mathematics
2+ years relevant work experience
Familiar with hardware integration
C in realtime embedded environment
Familiar with structured design techniques (UML)
Familiar with RTOS environments such as VxWorks
Windows programming
Experience with implementing data processing algorithms a plus
skills Software Design Engineer with a degree in Software, Electronics, Physics or Mathematics
hardware integration
C in realtime embedded environment
structured design techniques (UML)
RTOS environments such as VxWorks
Windows programming
implementin
|
