Click here to visit
our list of resources!
UK Accounting Jobs
Childcare Jobs
Engineering Jobs
|
 |
|
|
Searched in jobs for keywords OVERSEAS and cost and engineer
Results are ordered by date. Older jobs are included as that agency may have other jobs that fit the search: OVERSEAS cost engineer.
Click the job you want more information on:
- Production Engineer
- posted on 05/04/2004
location East Sussex
description East Sussex
This is a fantastic opportunity to join a privately owned, successful CEM that pride themselves on working closely with their customers to understand their needs. They offer an in -house prototype manufacturing service at their headquarters. This, together with DFM feedback, enables continuous improvement in quality and manufacturing efficiency. Their global purchasing channels coupled with an 'open book' policy with their customers ensures that material cost efficiency is constantly mainained.
Based at their new offices in East Sussex, there will be regular visits to their facility in Tunisia and Hungary. You will be involved in all aspects of Production Engineering covering Conventional and Surface Mount PCB Technologies, Cable Looms, Complete Unit Build and Test. The Labour Costing of Enquiries, the creation of BOMS, Writing of SMT Programs, SPC Introduction, aiding and assisting Tunisia and Hungary in Quality and output of work, along with involvement of their Customer Base.
This is very much a hit the floor and running job with overseas visits.
To apply for this position please contact Janet Marsh on 01582 450054 or JMarsh@Redlineplc.com.
For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
- Production Engineer
- posted on 26/03/2004
location East Sussex
description East Sussex
This is a fantastic opportunity to join a privately owned, successful CEM that pride themselves on working closely with their customers to understand their needs. They offer an in -house prototype manufacturing service at their headquarters. This, together with DFM feedback, enables continuous improvement in quality and manufacturing efficiency. Their global purchasing channels coupled with an 'open book' policy with their customers ensures that material cost efficiency is constantly mainained.
Based at their new offices in East Sussex, there will be regular visits to their facility in Tunisia and Hungary. You will be involved in all aspects of Production Engineering covering Conventional and Surface Mount PCB Technologies, Cable Looms, Complete Unit Build and Test. The Labour Costing of Enquiries, the creation of BOMS, Writing of SMT Programs, SPC Introduction, aiding and assisting Tunisia and Hungary in Quality and output of work, along with involvement of their Customer Base.
This is very much a hit the floor and running job with overseas visits.
To apply for this position please contact Janet Marsh on 01582 450054 or JMarsh@Redlineplc.com.
For further details on this and many other vacancies visit our website at http://www.redlineplc.com
skills
- Gas Turbine Materials Engineer
- posted on 22/03/2004
location Surrey United Kingdom, Surrey
description ERA supports clients at every stage of asset management lifecycle, from technical specifications and procurement services through reliability and availability modelling to the introduction of condition-based maintenance policies and strategies to ensure the cost-effective delivery of performance, serviceability and reliability objectives. Gas Turbine Materials Engineer Growth in our Gas Turbine consultancy business is creating new opportunities at ERA. As a result of this we are seeking to recruit an additional member to the team. The successful candidate will be involved in a wide range of projects providing support to ERA’s clients on operational issues, turbine refurbishment and turbine failure investigations. As a member of the Engineering Consultancy Services group you will work alongside other mechanical engineers, materials specialists and electrical engineers involved in similar and complimentary disciplines. We are looking for a senior engineer with a mechanical or materials engineering qualification (preferably C.Eng) and at least 5 years experience on gas turbine design, manufacturing, commissioning, operation or condition assessment. Experience of hot gas path components and their degradation and repair would be an advantage. As well as working on technically challenging projects you will assist in the development of new business areas working on proposal preparation and costing and providing less experienced staff with the benefit of your knowledge. The role may entail occasional overseas travel. ERA offers you excellent opportunities for career development along with the benefits associated with a long established employer including Private Medical Insurance and 25 days holiday. Please forward your CV to response@web-recruit.net quoting Ref: 66/156/2204. *** NO CANVASSING FROM AGENCIES PLEASE ***
skills Gas Turbine Materials Engineer
- Graduate Mechanical Engineer/Metallurgist
- posted on 22/03/2004
location Greater London United Kingdom, London
description ERA supports clients at every stage of the asset management lifecycle, from technical specifications and procurement services through reliability and availability modeling to the introduction of condition-based maintenance policies and strategies to ensure the cost-effective delivery of performance, serviceability and reliability objectives. Graduate Mechanical Engineer/Metallurgist ERA’s Engineering Consultancy Services group is seeking a Graduate Mechanical Engineer/Metallurgist to join its team of specialists providing consultancy support to our UK and international refinery, petrochemical and utilities sector clients. Initially you would be responsible for the performance of identified tasks within projects and would gain field experience to ultimately assume complete responsibility for individual projects/site operations requiring mechanical and/or metallurgical input. As well as working on technically challenging projects you will assist in the development of new business opportunities by preparing and costing proposals. A knowledge of power stations, chemical processing or refinery equipment would be an advantage, but is not a prerequisite. You will need a degree in mechanical engineering or metallurgy. We would consider a new graduate or a graduate with limited practical experience with a view to their attaining CEng status. The role may entail occasional overseas travel. ERA offers you excellent opportunities for career development along with the benefits associated with a long established employer including Private Medical Insurance and 25 days holiday. Please forward your CV to response@web-recruit.net quoting ref: 66/160/2204. *** NO CANVASSING FROM AGENCIES PLEASE ***
skills Graduate Mechanical Engineer/Metallurgist
- Snr Failure Analysis Engineer – ICs
- posted on 28/08/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Senior Engineer - Power Amplifier IC Design
- posted on 27/08/2003
location Overseas Ireland
description <p>Position within a multi-national organization for experienced IC Design Engineers to work on the development of Power Amplifier ICs for portable wireless communication products.
<p>Minimum Skill Requirements
<li>A minimum of 3 years proven expertise in the design and development for Power Amplifier IC's for portable wireless communications products or devices is required. A working knowledge of CDMA or GSM. Demonstrated experience with bringing IC-based power amplifiers from inception to high-volume production is desirable. Strong analytical skills desired. Knowledge of the semiconductor technology trade-off's and packaging trade-off's is highly desirable.
<p>Job Description
<li>Responsibilities will include the RF design, simulation and demonstration of novel power amplifier architectures for 2G, 2.5G and 3G markets. The simulation tools used will be ADS and Matlab. While the successful candidate will be part of the RFIC Team, based in Cork, it will be necessary to work within a multinational co-development team that is spread across sites in Europe and the USA. Strong communications skills are, therefore, required. Most notably, collaboration with the Systems Engineering Team in NJ to support the developing of a novel RF transmitter product that will bring efficiency and cost benefits to the market will be required.
<p>Very competitive rates.
<p>For more information contact IC Resources now.
skills RF IC Design, Power Amplifiers, PAs, Wireless Communications, CDMA, GSM, WCDMA, 802.11
- Snr Failure Analysis Engineer – ICs
- posted on 21/08/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Snr Failure Analysis Engineer – ICs
- posted on 13/08/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Snr Failure Analysis Engineer – ICs
- posted on 05/08/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Snr Failure Analysis Engineer – ICs
- posted on 31/07/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Snr Failure Analysis Engineer – ICs
- posted on 24/07/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
- Snr Failure Analysis Engineer – ICs
- posted on 17/07/2003
location Overseas
description <p>This is an opportunity to join a leading IC design and manufacturing organisation in Malaysia. Established in 1985, the company has grown into a major player in the semiconductor market, operating a number of independent business units.
<p>The manufacturing / foundry team now seek a senior failure analysis engineer with a strong understanding of silicon manufacturing processes. Specific skills required include characterisation and optimization of FA processes, the ability to improve equipment process/capability for better turnaround time and cost reduction, and experience with FA equipment such as Curve tracers, Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY, Scanning Acoustics Microscope.
<p>If you are interested in a challenging career opportunity in a tropical setting, contact us now!
skills IC Failure Analysis engineer, knowledge of Scanning Electron Microscope, Photon Emission Microscope, Liquid Crystal, Real Time X-RAY. Malaysia
|
